GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by CDNRatMan
- September 30, 2013, 19:19:15 PMok your off the list now that you have finally come back and cleared up a few things.....oh welcome back
Posted by Drift1
- September 30, 2013, 18:56:59 PMQuote from: CDNRatMan on September 30, 2013, 17:09:56 PMAhhhh Haaaa ,my good fella Ratman ! My bikes do get parked in the man cave for the wintersnot sometimes ........you are all talk but if your wife ever saw these pages you would be hiding in the corner like a whipped puppy.
nhtrikes man cave gets you up over the others for now......but the bike should be parked in there then not the shed.....
All my comforts are there > Big screen tv for what ever I feel like watching , stereo , fridge hell there's even a bedroom down there for the late nights . Aidan likes to refer to them as guys night because there's no ladies aloud in the man cave 
Posted by CDNRatMan
- September 30, 2013, 17:09:56 PMnot sometimes ........you are all talk but if your wife ever saw these pages you would be hiding in the corner like a whipped puppy.
nhtrikes man cave gets you up over the others for now......but the bike should be parked in there then not the shed.....
Posted by greenbarn
- September 30, 2013, 16:41:00 PMQuote from: CDNRatMan on September 30, 2013, 12:05:15 PMHey Ratman, lay off of NHTRikes. I'm sure, like me, he can do whatever he wants to in his own house!! It's just that sometimes SHE tells him WHAT he wants to......ok so nhtrikes you now are on the list with the following
PC
Drifter1
GreenBarn
petemoss
I now know you are the man of the house but the boss is the one who rules the house......lol...........
Posted by nhtrikes
- September 30, 2013, 14:41:26 PMYes . . . I am well housetrained . . . but I do have a man cave, does that count?
Posted by CDNRatMan
- September 30, 2013, 12:05:15 PMok so nhtrikes you now are on the list with the following
PC
Drifter1
GreenBarn
petemoss
I now know you are the man of the house but the boss is the one who rules the house......lol...........
Posted by nhtrikes
- September 30, 2013, 11:43:52 AMYep, it's heated. Plenty of room for comfortable seating (mechanics stool), tools, moving around, etc. but not quite enough room for a fridge or tv. Had a good laugh at that. If I had those things in there my work would never get done or my bike would be all backwards. I know my wife wouldn't let me put it in the living room. I do have a two tap kegerator in my bar, but that's a story for another day!
Posted by CDNRatMan
- September 30, 2013, 08:27:05 AMoh lord did I hear right.....
Quoteof course you have heat in the shed? I would have a beer fridge really close by? Some comfortable seating is also required, and so then a TV is needed. All important things to be handy while tinkering and working on your ride.Preparing the shed now for the project
Shed for the winter.......never.......
Posted by nhtrikes
- September 30, 2013, 06:58:33 AMThanks for all the info! I will let you know as soon as I get started, after the riding season of course. Preparing the shed now for the project. I'm sure I will be back to this string for some more advice as I get along. I will take some pics as well as it goes. I will get with knurls, it is a chrome bar. I'll wait on the extensions until I get the bars and see if I can re-position things first. If I can't I'll be back with some more questions I'm sure. Thanks again!!! Enjoy the rest for season, great weather here again this week!
Posted by Bucko
- September 29, 2013, 22:25:08 PMI put 39" beach bars (I think they were 39's) many years ago. Didn't change any cables but I did have to pull the front brake hose out of it's loom and move it in a bit.
One thing to watch for, and this isn't beach bar specific, but when you tighten up the bars, make sure the throttle cable tubes at the bottom of the throttle grip assembly don't contact your tank when you move the wheel fully to the right.
If you want to get the bars a little bit lower, you can swap out the throttle grip for one from a Meanstreak which has the throttle cables coming out of the top rather than the bottom. Now, I haven't actually done this mod but I'm planning on it (I've only had the M/S throttle for about 8 years now - don't want to rush into anything 
). I've read that the stock Drifter cables won't work and the M/S cables arn't long enough (particularly if you have wider beach bars) so you might need to do some cable measuring (if you do, let me know).
Posted by Troll
- September 27, 2013, 08:28:31 AMNhtrikes is doing the beach bar thing...I have 4.5" pullback H-D risers and 1983 E-Glide stainless bars on mine. Didn't have to extend anything, just a little rerouting.
Posted by Mak
- September 27, 2013, 07:16:39 AMTroll
I don't know the dimensions (pullback, width & rise) top o' my hat, but before you extend the cables try the bars without it. If no good then extend. What I have done is I bought some old controls off ebay and so kept wire colours. The extensions on my scooters are different for each scooter.
The J1 is extended and cables run external - easy peasy no probs.
The R1 (BigMak) is extended and runs insider the handlebar
The R1 (MakMachine) is extended, runs inside the handlebar and through the triple tree top plate. It also has a second connection point with electrical cable joiners so that I can take off the triple tree.
Hint 1 - offset the connection points on each cable, other wise you end up with a big bulb where the joins are. I used 3 different offsets and it works great. I soldered each wire, then shrink wrapped each wire and then put the hole thing through cable containment.
Hint 2 - make a plan for cutting positions (don't forget it should be diff for each wire), precut the insert wires (of course they shall be all the same size).
Hint 3 - depends of how you go about it - if you get stuff off ebay you only have one joining location - if you insert wires then you have to insertion points - again try to offset them.
Lastly - if you can have a battery and tester ready so that you can check for function the wiring before you install the lot - saves you time if not all is working right away.
Any Qs drop me a line
Mak
Posted by Troll
- September 26, 2013, 12:46:10 PMKnurled bars...no doubt at all, especially if they are chromed. Without the knurl, they will slip no matter how tight you make the clamps.
Posted by nhtrikes
- September 26, 2013, 11:49:08 AMOk, so my winter project is to move my regulator to the front of the engine below the radiator (10 min.) and to put a Flander's Grande Beach Bar (N5) on the bike. Thank you to all who have shared your info regarding beach bars, wouldn't even be attempting this myself without the resources found here. I know I'll have to extend the cables, hoses and electrical. Have Motion Pro in my favorites to call. One more question, should I get the 1" metric with knurls or without? Do our handlebars have knurls or are they plain? Flanders states knurls are 4" inside and 5" outside so I'll measure my clamps tonight to make sure they line up. I just don't want the knurls to show outside the clamps, obvioulsy. Anything else I need to be concerned about??? Thanks!
Pete