We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
What grips are you going with? I have the black Kury Iso grips and they look nice and are very comfortable. I also put on a matching black throttle boss. This was well worth it. At least till I get some sort of cruise control.
And what did you mean by "nacelle"?
Ok the snow is here the cold temps are here so my list is in progress and we are off now in mod time.
#1. replace both set of brake pads, this will encompass, rebuilding both calipers and checking all hoses and cables involved in the operation of the brakes,
#2. Bike now has 33 some ks on it and not knowing if the valves have ever been checked or looked at that is in the plans for after xmas,
#3. Seat is getting new foam and gel foam, sculpted and formed to my buttocks, by a local custom seat-maker, at the seat place,
#4. Replace front springs with 1500 Progressive springs and new oil, on order, remove and check triple tree bearings and parts,
#5. Replace rear shock, on order, remove all the pivot points and bearings, grease fittings, check and replace as required, grease, re install,on order waiting delivery
#6. add what will be black bumperettes to the rear fender, First coat of primer is on and drying,
#7. Replacing all the chrome bullet heads with black ones, painted and done waiting to be installed,
#8. Build the nacelle' paint it black and install it, have the parts here, decided to forego this mod because of the windscreen
#9. Replace handgrips, grips are on order
#10. Replace rear sprocket with 38T 0ne because of 0hi0 barn said to almost done
#11. Still working on rear passenger folding floor boards.
#12. Mystery project, project might be out because lack of finding correct parts required
# 13 Second mystery project, still hunting up the parts
I'll be documenting the mods and will post them once I am done them.......just need to find them missing parts......
Page created in 0.100 seconds with 16 queries.