Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 1500 only
► Modify message ( Re: New '99 Drifter )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

Hey thanks for the input guys.  I looked for the All Balls bearings but can't seem to find them for the Drifter which is why I was wondering what parts crossed between bikes.  Main concerns right now are to get the rotor and the bearings done.  I do have a mig so if that's the easy way, I'll burn a bead on the races.  I've had ton of bikes but this is my first big twin.  Seems to throw a lot more weight around than an 1100.  I've mostly had 4's and this is also my first FI bike.  Hell, I thought it would be a piece of piss to get it going with no carbs to clean.  I have the feeling that the fuel pump tanked and the PO just put it up.

The worst thing is waiting for parts to come in the mail.  What about the rotor?  I saw one listed in an eBay link posted on here yesterday.  It's solid but mine resembles the rotor found on the other models.  I just want one that fits that won't break the bank.  I also need to find the baffle for that exhaust.  Not only is it loud, but I can't see an open exhaust like that being too good for the valves.  I guess I could weld one up but I'd rather have a Roadhouse baffle if I could find one.   Guess I'll continue my search for parts and hopefully get some ordered tomorrow or Monday.

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll

- October 12, 2013, 19:36:27 PM

All Balls steering head bearings...The big problem will be getting the old races out of the tapered neck. Do you have access to a mig welder? Welding a bead around the center of each race, and when it cools, they almost fall out. I have almost 82,000 on my '01....stone reliable. Nice looking ride...you'll have that one for a long time, and yes, the solid mount pipes will induce vibration. Mine has a little "Harley shake" at 52-54 mph in 5th gear, otherwise, it's a magic carpet

Posted by CDNRatMan

- October 12, 2013, 19:11:15 PM

Very nice looking ride, we have people who will fix your issues on line...lol...they are that good at what they do.......I have Roadhouse exhaust on my bike and really like them (with the baffles in), but I really like that serrated section of pipe......wish I could find them....

Posted by dakuhosu

- October 12, 2013, 18:54:41 PM

Great looking bike, the miles are not too bad. Everything you described can be easily fixed for cheap. Alarming to hear about the front brake, glad everything is cool though. I have the same bike and the vibration is noticeable at certain rpms on mine. There is a recent thread on replacing the steering bearings.

Posted by Beach Bum

- October 12, 2013, 17:52:49 PM

Howdy folks... Just picked up a new to me Drifter and am kind of nervous about the overall product. I bought it from a local guy who had it stored in his garage for the last five years. It looked good and he swore up and down that all it would need was a battery and fresh gas and it would start right up. Soooo... I installed the new fuel pump yesterday after a week of waiting and it finally fired . Had to acid flush the tank to remove the rust wasn't as obvious with the bad gas in the tank. BTW, the $23 eBay pump for a Ford Aspire worked dandy.

So I take it on a ride yesterday around the neighborhood and low and behold, the front caliper seizes up midway through a slow turn. Grateful that crash bars work. I went ahead and stripped down both calipers and did a full brake flush. Okay now but the front rotor is warped beyond belief. AAARRGGGHHH!!! Now I've noticed that the steering head bearings have a hard spot at center, and I'm concerned by the amount of vibration this engine produces.

The bike is equipped with a Roadhouse exhaust, with no freaking baffles (LOUD!!!) that is solidly mounted to the bike. Not certain if this would cause the vibration but it certainly does seem to smooth out with RPM's. As this is my first 1500 Drifter I'm not sure what to expect.

My questions are, how much mechanical noise/vibration should I expect from this engine?

What parts are interchangeable between the VN series of bikes? I've seen solid front rotors and the type found on the Classics. I'm having a tough time finding aftermarket steering head bearings for the Drifter.

What type of longevity do these bikes have?

Does anyone know where to procure a baffle for this exhaust or should I just make one?

SMF spam blocked by CleanTalk