We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
idles good, accelerates fine, rolles well, exhaust isnt gassy or plugs arent fouled.
the one thing i do notice is under slow acceleration in first it seems pretty knocky, maybe its just me and the engine under load at low rpm chucging allong.
other than that nothing seems off, no lag or sputtering or bogging under acceleration. no smoke of any kind at any time. im going to take the covers off the throttle body cause i do have a ide adjustment knob under the chrome cover, i dont think this is stock i haven heard anyone with this. its a black plastic knob with a hex nut in the center that i can turn to adjust the ide speed on the right side of the bike. or maybe this is stock lol. but cant find it in any break downs online. so maybe more is fiddles with in the throttle body from the previous owner.
There's something very disturbing-looking about those goat bladders. 
Weird thing is if it was running that rich wouldn't it show up on the plugs and how it runs? Does it seem to be running ok? Good acceleration? Does the bike roll easily on flat surface without feeling any resistance? Have you always had this terrible gas mileage or did this occur after the tuneup? Could be those gremlins, siphoning gas overnight when you're sleeping!
Do you have a bell???
Quote from: nhtrikes on September 25, 2013, 15:00:04 PM"Air intake sensor, intake air temp sensor...same same..the Drifter has AIT, MAP and BARO, but no O2 sensor. Coolant temp and TPS are also there, but the map is the map. I found, with mine, that the BARO sensor has a HUGE effect on which cell of the fuel map the computer uses. At sea level, running 70 mph and about 70 deg. with stock everything, I was getting 39-41, at 5,000 feet, running (same trip) 75 mph, I was getting a steady 45. Running in the Georgia mountains at Drift-In I was getting over 50, with my home brew air box." - From another string -
Troll, could it be one or several of these sensors that are causing such poor mileage???
Could be any of those - it's just like a car, the ECM takes all those inputs, and makes a decision on how much fuel to add. If it think's it's -20F outside, it dumps a whole lot more fuel than 60F.
there is 27000km on the bike. im going to check to see if all the plugs are sparking properly in the next day or so as well.
"Air intake sensor, intake air temp sensor...same same..the Drifter has AIT, MAP and BARO, but no O2 sensor. Coolant temp and TPS are also there, but the map is the map. I found, with mine, that the BARO sensor has a HUGE effect on which cell of the fuel map the computer uses. At sea level, running 70 mph and about 70 deg. with stock everything, I was getting 39-41, at 5,000 feet, running (same trip) 75 mph, I was getting a steady 45. Running in the Georgia mountains at Drift-In I was getting over 50, with my home brew air box." - From another string -
Troll, could it be one or several of these sensors that are causing such poor mileage???
Troll, were you getting as bad mpg as Silverback with your '01 as stock? Even with stock air filter and exhuast, mileage shouldn't be as bad as he is getting with all stock equipment. How many miles on your bike Silverback? Could it be the ECM causing the terrible fuel economy, Troll???
It's actually more like an expansion chamber/collector. Increases exhaust volume (size) without increasing volume (noise). Putting the stock system on my '01, replacing the Peace pipe, actually improved overall fuel economy, not by much, but I keep very accurate records.
That description of the goat bladder insides sound more like a resonator than a converter? Don't really see the sense in them
OOOOps... I knew that...My mistook. I'll bet it still has no converter...Pull the muffler off, and shine a light into the goat bladder.
Troll buddy.....Edmonton is in Canada......not in the land of OZ.......
Silverback did you buy an Aussie bike?
Maybe the Australian version of this bike has a converter, but mine doesn't. I have looked into my goat bladder, and there is NOTHING in there that even looks like a converter. Just 2 perforated tubes leading into the can with one big outlet. I was getting less than acceptable fuel mileage from my '01, and all I really needed to do was open up the intake to let the engine breathe. I have a stock exhaust and my own design air box...I AVERAGED 46 mpg on my trip to Drift-In, over 2,500 miles in 8 days...
Have you checked to see if the goat Bladder (catalytic convertor) is partially plugged. This would cause your fuel consumption to drop. You would notice this by several ways rough idle, poor acceleration, and of course fuel economy, Not sure how you would check it or if you can even find a replacement. Just one of the things I would check though.
Ride with Pride
well this tank is 94 octane, and i filled it with 13 liters it wasn't on E>
no accessories on the bike.
I'm down to 1/4 tank right now with only 102 km on the display.
no gas smell around the bike, not that i notice.
Not sure what the reason(s) could be but that definitely sounds way too low for our bikes. Any smell of gasoline at all around the bike? Leaking? When you say you're only getting 170-190 km (105-118 mi) per tank, is you tank totally empty? How many liters (.264gal) of gas are you putting in when you fill it? I have an '02 1500 and get 46.5 mpg city to 48.5 mpg highway consistently. I have no add-ons, ie. windshield, bags, things that might cause extra drag. But even that wouldn't account for such poor fuel mileage. What grade (oct. rating) of fuel are you using?
Page created in 0.102 seconds with 12 queries.