Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - September 21, 2013, 14:32:16 PM

  Noticed the rear guards also and wondering if your spouse uses them as her foot pegs or you remove them when riding 2 up?

Posted by Darth Wraith
 - September 21, 2013, 13:49:58 PM
Quote from: mittico68 on September 21, 2013, 04:03:52 AM

Thanx Darth W., but even though it could be a simply solution (You're referring to the solo seat, right?), I think I wouldn't like the look it could give to my bike: too cheap :-\
I was thinkin' about makin' some homemade stuff, something not too flashy and more in line with the two sidebars.
Btw, here's the picture of my Baby.

Nice rear crashbars. Where did you find them?
Posted by CDNRatMan
 - September 21, 2013, 10:12:09 AM

  AWESOME kw, looks really nice, notice you have the bumperettes on yours, and can you take a couple of close ups of them and the mounting? Thanks.

Posted by kw-retrorider
 - September 21, 2013, 08:08:37 AM

Thanks to the group, I got rid of the "wuh, wuh" noise, so took the time to finally install a set of K5000-227 bags with Osprey/Traveleer 1/4" steel brackets.

Photo for Ratman, who is tracking blacked out wanna be 800s....my 2002 with black spots, turns signals, engine guard, upper triple tree, risers and speedo housing.....

Posted by mittico68
 - September 21, 2013, 04:03:52 AM

Thanx Darth W., but even though it could be a simply solution (You're referring to the solo seat, right?), I think I wouldn't like the look it could give to my bike: too cheap :-\
I was thinkin' about makin' some homemade stuff, something not too flashy and more in line with the two sidebars.
Btw, here's the picture of my Baby.

Posted by Darth Wraith
 - September 20, 2013, 23:47:58 PM

Well, my mod is probabl exactly what you need. You can swap the seats by removing from the frame the four screws that fixes the seat supports only.

Posted by mittico68
 - September 20, 2013, 12:57:28 PM

Oooooops!
I meant to write: "my wife loves to ride WITH me"... :-[

Posted by mittico68
 - September 20, 2013, 12:53:40 PM

My winter plan is to put a sprung single seat on, but leaving me the possibility to put back on the oem 2up seat (my wife loves to ride wide me ::)).
The matter is: how to do it without removing the bracket, as far as my Drifter's got two new rear bars that bolt on it and I'd like to let them on (btw, pic is comin' soon...).
I'm thinkin' about mountin' the OEM single seat brackets (just to bolt the rear bars) and add some kind of stuff like Darth Wraith's mod, in order to keep the two brackets joint togheter, but I don't know how much light it has to get from the rear fender.
Any suggestion from all of you would be really appreciated... :)
Thanx

Posted by Darth Wraith
 - September 20, 2013, 08:00:44 AM

http://www.facebook.com/media/set/?set=a.10201958991358083.1073741832.1283917645&type=1&l=587074244f

I put back the 2-seat, I had a passenger...

Posted by Darth Wraith
 - September 20, 2013, 07:58:44 AM

It's made from raw steel, actually the opening was not enough for the fender up movements ( we have bad roads, it was necessary to install progressive springs in front), so I cut more from it. I think I could simplify the thing, to leave only the spring support, but the initial plan was for a very strong "basement"... :))

Posted by mittico68
 - September 20, 2013, 05:47:19 AM

Thanx Darth Wraith, for your time.  :)
Hope not to bore you, but I'd like to know what kind of bracket is the big black one I see attached to the back of the two springs: oem or homemade? Since that my Baby has got a two up seat, I've never seen that kind of bracket... :o

Posted by Darth Wraith
 - September 19, 2013, 08:59:41 AM

That's how it looks under the seat.

Posted by Darth Wraith
 - September 18, 2013, 06:23:10 AM

I,ll try, tomorrow

Posted by greenbarn
 - September 16, 2013, 12:25:23 PM
Quote from: Darth Wraith on September 16, 2013, 05:31:08 AM

Give me your email and I send you some photos, of course...

If you don't mind posting them on here, too, that would be great....  Might help one of us out in the future...
Posted by mittico68
 - September 16, 2013, 10:25:02 AM

OK.
Here it is: mittico68@gmail.com
Thanx for your help ;D

SMF spam blocked by CleanTalk