We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by mittico68
- September 21, 2013, 04:03:52 AMThanx Darth W., but even though it could be a simply solution (You're referring to the solo seat, right?), I think I wouldn't like the look it could give to my bike: too cheap 
I was thinkin' about makin' some homemade stuff, something not too flashy and more in line with the two sidebars.
Btw, here's the picture of my Baby.
Posted by Darth Wraith
- September 20, 2013, 23:47:58 PMWell, my mod is probabl exactly what you need. You can swap the seats by removing from the frame the four screws that fixes the seat supports only.
Posted by mittico68
- September 20, 2013, 12:57:28 PMOooooops!
I meant to write: "my wife loves to ride WITH me"... 
Posted by mittico68
- September 20, 2013, 12:53:40 PMMy winter plan is to put a sprung single seat on, but leaving me the possibility to put back on the oem 2up seat (my wife loves to ride wide me 
).
The matter is: how to do it without removing the bracket, as far as my Drifter's got two new rear bars that bolt on it and I'd like to let them on (btw, pic is comin' soon...).
I'm thinkin' about mountin' the OEM single seat brackets (just to bolt the rear bars) and add some kind of stuff like Darth Wraith's mod, in order to keep the two brackets joint togheter, but I don't know how much light it has to get from the rear fender.
Any suggestion from all of you would be really appreciated... 
Thanx
Posted by Darth Wraith
- September 20, 2013, 08:00:44 AMhttp://www.facebook.com/media/set/?set=a.10201958991358083.1073741832.1283917645&type=1&l=587074244f
I put back the 2-seat, I had a passenger...
Posted by Darth Wraith
- September 20, 2013, 07:58:44 AMIt's made from raw steel, actually the opening was not enough for the fender up movements ( we have bad roads, it was necessary to install progressive springs in front), so I cut more from it. I think I could simplify the thing, to leave only the spring support, but the initial plan was for a very strong "basement"... )
Posted by mittico68
- September 20, 2013, 05:47:19 AMThanx Darth Wraith, for your time.
Hope not to bore you, but I'd like to know what kind of bracket is the big black one I see attached to the back of the two springs: oem or homemade? Since that my Baby has got a two up seat, I've never seen that kind of bracket... 
Posted by Darth Wraith
- September 19, 2013, 08:59:41 AMThat's how it looks under the seat.
Posted by Darth Wraith
- September 18, 2013, 06:23:10 AMI,ll try, tomorrow
Posted by greenbarn
- September 16, 2013, 12:25:23 PMQuote from: Darth Wraith on September 16, 2013, 05:31:08 AMIf you don't mind posting them on here, too, that would be great.... Might help one of us out in the future...Give me your email and I send you some photos, of course...
Posted by mittico68
- September 16, 2013, 10:25:02 AMOK.
Here it is: mittico68@gmail.com
Thanx for your help 
Posted by Darth Wraith
- September 16, 2013, 05:31:08 AMGive me your email and I send you some photos, of course...
Posted by mittico68
- September 11, 2013, 10:43:12 AMReally COOL Drifter!
That's exactly the way I'd like to paint mine
By the way, as far as I can see, you've fitted a single sprung seat by leavin' on the original one's brackets (just like the mod I'm gonna try...). Could you please give some more infos and (even more appreciated) pics of that mod?
Thanx since now and ride with pride. 
Posted by 49Reo
- September 10, 2013, 23:55:46 PMVery nice.....
Posted by greenbarn
- September 10, 2013, 14:38:31 PMN I C E.... I love 2-tone drifters.