Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: September 11, 2013, 15:48:18 PM by gcates
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - September 11, 2013, 15:18:57 PM

  ok went and too pictures for you of the seat, mine is a 99 on a 99....but do not think it would be much different.....

Posted by CDNRatMan
 - September 11, 2013, 14:49:16 PM

http://www.ronayersmotorcycles.com/fiche_section_detail.asp?section=394890&category=Motorcycles&make=KAWASAKI&year=1999&fveh=9079

here is the break down of my seat and the parts.  Sounds like you just need some bolts to hold it to the frame.

Posted by 49Reo
 - September 11, 2013, 13:30:05 PM

Nice bike!!

Posted by gcates
 - September 11, 2013, 13:04:01 PM

I think that worked.  That's it with the seat in question.  The actual seat pan is pretty much just resting on the frame.  The little shoe horn metal piece underneath is in as far as I can get it to go.

Here's another with the solo:

Posted by gcates
 - September 11, 2013, 12:59:52 PM

Ok, thanks so much!  Love your bike...and your coat!  :D

I'll try to get this pic up. 

Posted by CDNRatMan
 - September 11, 2013, 12:54:06 PM
Quote

That's actually the part I've got figured out.  I can bolt the frame into place, but my problem is the actual seat.  It's not mounted to the frame in any way and I have to put it on seperate.  Is it suppose to be mounted to the seat frame?  And if so with what? As it is the seat part is pretty much just resting in place

ok so the seat is not mounted to the frame, I'll have to wait till I get home and can take mine off and get some pictures for you.
Posted by 49Reo
 - September 11, 2013, 12:26:54 PM

Welcome aboard, gcates! In case you haven't read about it, I'll warn ya now: these guys and gals are like magpies teasin' a house cat; they'll give ya no rest nor show ya no mercy until you post pics.....

Btw, did I mention pics??? ;D

Posted by gcates
 - September 11, 2013, 12:26:04 PM

That's actually the part I've got figured out.  I can bolt the frame into place, but my problem is the actual seat.  It's not mounted to the frame in any way and I have to put it on seperate.  Is it suppose to be mounted to the seat frame?  And if so with what? As it is the seat part is pretty much just resting in place.

Posted by CDNRatMan
 - September 11, 2013, 11:23:58 AM

  There should be a pair of brackets that come off the seat and go to the frame were there is 4 holes 2 on each side. I am at work and do not have access to my pictures to show them to you. But if you have no response till after I get home I will post them for you.
But if you look on this picture you can see them on the side of the seat.

Posted by gcates
 - September 11, 2013, 10:49:10 AM

Hello all.  I'm new to the board and just got my 800 Drifter yesterday.  I have an '05 and have bought an '02 stock two up seat from a lady in Texas.  The frame fits perfectly and it has the back rest.  My problem is the seat doesn't connect to the frame in any way.  There is a metal tab that inserts into the bike under the gas tank, but it doesn't really hold it in place that well.  It's very easy to just take the seat of the frame.  Am I missing a part, or not inserting the metal tab in correctly?  Any help would be appreciated.  This is my first bike, and I'm loving it!!

SMF spam blocked by CleanTalk