Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Ghostrider
 - May 19, 2010, 13:50:01 PM

OK, so I install the Harley dash mount ignition (it looks great) wire it up exactly as the diagram says do (yes I put the 100ohm 1/2 watt 5% resistor in the yellow wire that connects to the gray wire), cross my finger and hit the switch. WA-LA it turns over but won't start whats gong on ? Then I notice that when I turn on the switch I don't hear the fuel pump any more (maybe a good reason it won't crank). So I go to checking wires with the ole test light and find out that I have power from the switch to the resistor but not coming out of the resistor, I change the resistor and same problem these are brand new resistors and I tried 3 of them so what happening. I can put the old OEM switch back on and she fires right up. Everything is wired EXACTLY like the diagram in the Mods Section shows So someone that knows what I am doing wrong PLEASE tell me how to correct this problem. Oh and just in case it matters mine is a 1999 1500 drifter
Thanks Ghostrider

SMF spam blocked by CleanTalk