Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Elmo Hayride
 - July 26, 2013, 15:28:34 PM

I used a test probe to test the fuses and voltage.

Posted by John Hopkins
 - July 26, 2013, 12:02:25 PM

Just a quick question..

I've looked at the circuit diagram for your bike and it looks as if you have it switched to Park instead of on at the ignition switch..

If so I think you should only have voltage to fuses  5 & 6...Did you check the fuses for voltage with the switch on or did you remove them and only check for resistance..

John.

Posted by Troll
 - July 26, 2013, 09:19:53 AM

Research shows '99s seemed to have a high rate of ign. switch failure......

Posted by dakuhosu
 - July 26, 2013, 08:44:55 AM

Sounds like it's in the key switch, jiggle the keys.

Posted by Elmo Hayride
 - July 25, 2013, 20:32:37 PM

Thanks for the comments guys, neutral, kill switch, and the 15 A fuse are all good. I did check that fuse first after having read prior issues with that.

I just have no power in anything other than the running (tail) lights, signals, and horn. I'm probably going to have to copy the drawing and probe the lines.
Dave

Posted by John Hopkins
 - July 24, 2013, 11:42:55 AM

I suppose you could also try rolling it to make sure you haven't left it in gear..

John.

Posted by 49Reo
 - July 24, 2013, 11:07:04 AM

Check the red kill switch on the right handlebar; maybe it isn't working properly.....I've bumped mine getting off after a ride and had to scratch my head for a minute or 2 when going to start it the next time. :)

Posted by John Hopkins
 - July 23, 2013, 20:55:31 PM

Have you checked the 15a fuel injection fuse by the battery.

John.

Posted by Elmo Hayride
 - July 23, 2013, 19:58:12 PM

The only thing that happens when I turn on the key is that the tail/running lights come on and the high beam indicator comes on and stays on and the signals work. I hear no relays, fuel pump, the FI light doesn't come on or the headlights. The key switch seems to be doing it's job, the fuses are good, the bike got parked in the barn after a ride last night, and he battery was at 12.8v when I finally had to walk away tonight (so its on charge). I pulled the fuse box and theres no gremlins growing in the back of it. I was wondering if it was the VDS. Unfortunately I cant test anything because the ECU doesn't work either. Bike was running tip top yesterday, don't get it. I would appreciate any help.
Thanks,
Dave

SMF spam blocked by CleanTalk