Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - July 12, 2013, 12:36:16 PM

  ok here is the pictures as promised and a short note with each, hope this helps. No intent to insult anyone but I started right from basic go and went to the end.

Posted by CDNRatMan
 - July 12, 2013, 10:04:45 AM

ok I'll do the same today just for you....lol

Posted by Ricardo
 - July 12, 2013, 07:13:41 AM

Thanks, I've tried looking and I've tried to look. If I'm not thick, then I must be blind  8)

If all else fails, I'll take a photo and use a grid pattern and hopefully you guys can just simply point out the area to me, cause this is getting silly, heh.

Posted by CDNRatMan
 - July 09, 2013, 11:38:43 AM

 yes you are correct, and like it said do not try to go from 7 to one clockwise or you can really mess up the shock. New shock runs around $450.00 CDN.

Posted by Nanook
 - July 09, 2013, 11:27:26 AM

Isn't it the higher the number the stiffer the suspension. Highestbeing 7?

Posted by CDNRatMan
 - July 09, 2013, 11:10:11 AM

  Nope only ned to remove the outside cover, then look inside and towards the rear of the bike and you will see it, albeit you might need a flashlight if it is dark.  The bolt is not right there jump in your face, you have to look for it. A 12mm socket on a power bar and ratchet works really well. I am a small guy only 5'11"and 240 lbs......mine is set on 6 all the time, I also ride solo 98% of the time so it is really comfortable there.

Posted by Ricardo
 - July 09, 2013, 09:26:27 AM

I've read some posts as well as the instructions found here on how to adjust the rear shock: http://www.vulcandrifterriders.com/shockadjust.html

But I guess I must be thick or something, because I cant find the adjustment bolt. When I remove the left (plastic) panel, all I see is a bunch of electrics. Do I need to remove the inside plastic casing as well to reach the bolt?

SMF spam blocked by CleanTalk