Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - June 07, 2013, 17:03:18 PM

low beam and the two extra lights work just fine....ok so the spotlights are working ok and the low beam, so is your headlight one bulb? My 800 has a single Halegon bulb and it has both the High beam and low beam is right now I would check the filiment in the bulb.  If your bike has two bulbs I am not sure were to go from here. There is only one fuse for the low and high beam.

Posted by Ricardo
 - June 07, 2013, 14:16:37 PM

Man...I haven't had my bike for a week and I already need help from you guys...

For some reason, the high beam has suddenly stopped working. Low beam and the two extra front lights work just fine.

I tried replacing the high beam bulb, but that didn't change anything. So I thought I'd check the fuses and went back in to have a look at the service manual I downloaded (actually for the regular VN800).

Apparently, there's not one fuse for the high and one for the low beam, but rather one single fuse for the entire headlight. So if the low beam is working OK, it simply can't be the fuse. I've checked the cables in the head light shell, and they all seem to be seated OK.

What do I check next? :\

SMF spam blocked by CleanTalk