Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Drift1
 - May 20, 2013, 18:34:56 PM

Lucinda,the thread Ratman provided is the way KW and I also put our bar on.It was a hot topic and amuzing during the off season.....LOL.....It's very simple you just have to drill two new holes to mount the horn.Don't forget to use some type of glue,epoxy etc to put on the two plastic plugs provided with the bar.Don't forget to post pics.

Posted by CDNRatMan
 - May 20, 2013, 13:21:51 PM

  Lucinda:
plese check this thread out it shows how I mounted mine....

http://www.vulcandrifterriders.com/forum/index.php?topic=18250.25

ok the floor boards top bolts have to be removed, and the brackets go on the outside and the bolts are replaced, do not tighten anything yet just get the bolts started and everything in place, the bracket were the horn was should fit flush to it. I can repost some of the pictures for you....pm me if you have any more questions I'll check my hotmail  later........

alrat55@hotmail.com

Posted by Lucinda
 - May 20, 2013, 10:46:33 AM

Hi there everyone,

This is my first time posting and I am greatful for the wealth of information on this board. I recently received my engine guard for my 800 drifter. I ordered them off of ebay from "Guido" that many of you mention.  I have searched on here and cannot find the answer to my question. My husband and his friend attempted to put them on and are having some issues. As recommended from the board we bought longer screws to put where the horn was located. The problem is the guard is not flush against the radiator? It will not fit under the wheel lock so it is sticking out about 1 1/2" and all I see looking at it from the side is are the long screws! Should the wheel lock be removed to fit the guard flush against the radiator? If so how do you remove it? Or is there something they are just doing wrong that they are missing? Any info would be greatly appreciated...

Lucinda

SMF spam blocked by CleanTalk