Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by pcarrell
 - May 13, 2013, 12:54:57 PM

The fender is attached to the lower part of the forks, so lifting the bike will not change the distance between the fender and the tire.  You can lift it and remove the tire though.

Posted by John Hopkins
 - May 13, 2013, 11:41:12 AM
Quote from: plevine1 on May 13, 2013, 09:18:06 AM

Would it not be easier to remove the front fender to reattach the light?

I agree, and this will give you an excuse to give it a good clean..

John.

Posted by plevine1
 - May 13, 2013, 09:18:06 AM

Would it not be easier to remove the front fender to reattach the light?

Posted by Troll
 - December 12, 2012, 13:10:05 PM

The distance between the fender and the tire are a fixed value. If you drop the front wheel off, you will have plenty of room.

Posted by plevine1
 - December 12, 2012, 12:11:33 PM

I hit a bump and basically the entire indian head light on the front fender flew off never to be seen again. Only thing left is the base mounting plate. I bought a new one on ebay. I need to remove the base plate first to install the replacement.
Will I need to remove the front fender or will lifting the front with a jack provide enough room to get between the tire and fender?
Thanks

SMF spam blocked by CleanTalk