Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by John Hopkins
 - April 25, 2013, 07:14:53 AM

I think you need an oil change..

Having a bike serviced by someone else can be a bad idea, as Drift1 mentioned our bikes work with a wet clutch they can have shift problems if you don't use the correct oil..

I use SAE 10-40; Jaso MA-2; API SJ:

The brand I am using at the moment is Castrol Power1

But you should buy a service manual which will tell you how to do an oil change and do it yourself..

The manual will tell you to use 10-40; API SG, SH, SJ or SL. With Jaso MA:

Drain the oil, change the oil filter, leave the bike to drip while you go for a cup of coffee, then fit the new filter and top the oil up to the correct level..

This will not remove all the old oil because the clutch housing will retain some but the new oil will dilute the old oil enough to make it harmless.

John.

Posted by Drift1
 - April 25, 2013, 05:10:44 AM

NTL I was going to suggest an oil change being our rides are equipped with a wet clutch but,I see your ride has already been serviced.How is your bike stored?ex.(outside,heated garage etc.)I ask to eliminate possible internal moisture reasons.Also did your service include the cables being lubed?If so I'm thinking you may need a slight adjustment.These are were I would start with,"process of elimination" I'm sure It's something simple.Our professional members probably could shed more light on this matter.

Posted by Never too late
 - April 25, 2013, 00:04:04 AM

Hi Everyone

I have a 2001 800 and have been out going for some rides since the weather has brightened.  I find that when my ride starts out I get some even crisp shifts .... But when I am returning back the ride seems to change.   It feels like when the engine has warmed up 20 minutes or so the shifts / transmission feels clunkier.   Is that possible?  Or is it my imagination ?

My 800 was serviced this winter and it has about 21,000 miles.

Any thoughts?

Thanks Never Too Late

SMF spam blocked by CleanTalk