GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by koolray
- December 21, 2012, 07:11:28 AMGreat info on this leak i have the samething going on with mine as well left leg side up front and right leg side in back thanks for info concerning this leak or misting of oil.
Posted by 49Reo
- November 17, 2012, 12:28:25 PMAnd send a lot of them home...... 
Posted by aralph
- November 17, 2012, 09:46:20 AMEverything causes cancer in California, maybe they should annex that state and move everybody out....
Posted by DC
- November 16, 2012, 10:56:15 AMPure Feldercarb. We used to take baths in it when we were kids. 
Posted by Troll
- November 16, 2012, 08:42:20 AMDoesn't carbon tet cause cancer in california rats and birth defects in penguins that drink it?
Posted by DC
- November 16, 2012, 06:46:10 AMWhat about some old carbon-tetra-chloride for cleaning the area?
Posted by David Baker
- November 15, 2012, 21:14:12 PMI'm truly amazed at the wealth of knowledge this site has to offer. Recently I noticed the same symptom that Chilli described, My first thought was that it was a gasket under the head cover and was dreading the thought of having to tear the bike down. I also had recently switched to a synthetic blend and soon after I started to notice the seepage. It also seemed that the bike ran on the sluggish side. The last time she was due I drained it completely (even replaced the oil screen/spring) New Oil filter, Went back to SAE 10w-40 oil.
Bike seems to be back to the responsiveness it had when I bought it, Still have the seepage, I keep an eye on it and clean it periodically. Now that I have my new found knowledge from this glorious site (Kudos to all who make it possible) I know what I'll be doing soon as my riding time goes into hibernation mode. Thanks again! BTW... You'd have to stand in line in a Harley Shop for this kind of info! LQTM
Posted by ChilliDrift
- November 12, 2012, 12:13:33 PMPermanent marker might work.
Posted by 49Reo
- November 11, 2012, 19:53:10 PMWill it work on the vinyl?
Regards and such,
49Reo
Posted by chief
- November 11, 2012, 19:06:49 PMLeather dye would like handle that problem...
Posted by 49Reo
- November 11, 2012, 18:38:24 PMOne thing about brake-cleaner; I got a few minute droplets on my stock solo seat, and now have little white spots on my pretty black seat; so be careful; spray it on a rag, AWAY from the bike; trust me, they DO NOT look good with little white spots on them! 
Regards and such,
49Reo
Posted by Troll
- November 10, 2012, 08:28:12 AMThe sealer only works if the parts are CLEAN! 45 Bravo is correct about the brake cleaner...it's a dandy thing to have around, anyway. About $2 at Wal-Mart, it not only cleans away oil and LEAVES NO RESIDUE, but it will clean oil spots and crap off clothing. It's basically the same stuff dry cleaners use. Carb cleaner is NOT the same, and will leave a deposit behind that will impede the sealer. I have no idea how many intake manifolds I resealed because G.M. changed the after machining process cleaner they used back in the early 90's and the silicone seal wouldn't stick to the not quite clean surface. I remember doing 3 in one day, each one paying about 3.8 hours....warranty flat rate. I could hardly stand up after that.
Posted by 45 Bravo
- November 09, 2012, 19:32:10 PMUsing brake cleaner and cleaning it REAL WELL, is the key.
Mine is still holding (knock on wood).
And yes, very little silicone is needed..
That is a very inventive, and unique approach to the problem..
45 Bravo
Posted by ChilliDrift
- November 09, 2012, 10:55:25 AMGetting it clean prior to putting high temp sealant on is the trick. I actually took mine to the car wash first. Came right home, let it cool and cleaned with Qtip swabs and alcohol till it was clean. Needed very small amount of sealant actually, just covering the plug seam and let it dry for a couple of days. I used a little plastic painter spatula per 45 Bravos advice. It worked well and seems to be holding fine. I did put the bike up on the jack to get it up high enough to make it easier.
Posted by rawv
- November 09, 2012, 08:53:19 AMHey Troll ...I tried that fix and it still leaks a bit I've got so much silicone up there that I probably won't be able to get the cover off when its time to fix it .