We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by chief
- February 28, 2013, 19:09:49 PMIf you are gonna buy one, buy it through our amazon acct so we will get a buck or two commission on the sale...
Posted by pcarrell
- February 28, 2013, 16:53:59 PMHmmm, I was always told to unload them first.
Posted by Troll
- February 28, 2013, 14:13:18 PMThat pump looks just like mine! Funny how that happens. I played the raise the bike up and adjust the air game for the first year, now I just keep 25 psi in them measured with the bike on the ground..can't see any difference.
Posted by pcarrell
- February 28, 2013, 13:36:24 PM49 is right, it takes a special kind of pump called a "No Loss" pump. Mine is sold by Progressive Suspension and looks like this......
There are other makers out there too.
Do not use a regular pump (hand or otherwise) on these shocks. You'll blow them out in a heartbeat, and they ain't cheap! (Plus, you'll NEVER get them balanced!)
To air the shocks up, I jack the bike up so that the rear wheel is off the ground. Then hook up the pump and either let air out or add air to the desired pressure. If memory serves, 42PSI is the max you're supposed to run.
Posted by 49Reo
- February 28, 2013, 13:20:38 PMBe careful putting air in; it takes very little air to set them. I use a hand pump with gauge, it screws on to the air valve, and when you unscrew it it loses no air. Safest way, IMHO. As to airing them off the bike, why would you? Or maybe I missed something?
Regards,
49Reo
Posted by Anti-hero
- February 28, 2013, 12:26:13 PMSorry let me rephrase that: I'm I able to take off the shocks and add air then put them back on the bike? Or do they have to be on the bike at all times when adding air?
Posted by Anti-hero
- February 28, 2013, 11:58:15 AMI'm I able to take off the rear shocks and put them back on the bike? Or they have to be on the bike when putting air?