Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► General Discussion
► Modify message ( Re: DUO CLUTCH From THUNDERMFG )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

The MS clutch is the same as the Drifter clutch nowadays. The only time it was different was in 2002/2003.

Originally, the drifter clutch was endowed with a single holder and a relatively weak spring(plate). The MS had a similar setup but a stronger spring plate in 2002 and 2003.

The problem was the single holder allowed the weak spring to flex too much causing premature slippage in the clutch. Some folks in 2002/2003 latched onto the fact the MS spring was stronger so they used that to upgrade their drifters.

Subsequently, ALL 1500 and 1600 Vulcans were modified to use a new, stronger spring and two holders. SO, if you walk in and ask for a MS spring plate, you will get the same spring as shared by all other 1500/1600 Vulcans.

I added the current spring and two holders to mine some time ago, and have no clutch related problems. I did change out the friction plates at that time as well.

The info, charts etc is in the mods section of the web site, under clutch... or

http://www.vulcandrifterriders.com/clutchparts.html

Also, there are various aftermarket clutch kits listed in the accessories area. I used Barnett friction plates in mine.

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by pcarrell

- March 17, 2010, 18:11:26 PM

I've heard the Barons one is good, but swapping out for a Meaanstreak clutch would probably be all you really need, and it's a straight bolt-in deal.

Posted by Varooom

- March 17, 2010, 10:16:20 AM

I'm about to do this job myself, having had it done twice by the local Kawasaki shop with only 20-30 K miles between them. Can you tell me how difficult the upgrade mechanical work is?
Thanks,
Varooom

Posted by Big Tee

- December 06, 2009, 22:06:44 PM

I had considered the Thunder Mfg. clutch but they did not have any available. I ended up with the Turbo Tech clutch and I love it, it hooks up real good.

Big Tee

Posted by chief

- November 30, 2009, 11:26:01 AM

I haven't seen this one installed.

There is some info on clutch upgrades/repairs over on the web site in the mods section. Also some parts info in the Accessories section.

Cheers.

Posted by dragones_benalmadena

- November 30, 2009, 10:00:35 AM

Hi to all out there,I am shortly going to throw out my origianl clutch and was contemplating upgrading it with the DUO CLUTCH kit that Thundermfg sells.has anybody intstalled this ?Any info on the actual instalation of this would be appreciated since I am going to be undertaking the job myself.

SMF spam blocked by CleanTalk