Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by DC
 - January 29, 2013, 11:23:01 AM

Is the alarm going to actvate the horn, or a separate siren?

Posted by John Hopkins
 - January 28, 2013, 13:46:07 PM

I coudn't wait, I got it, just behind the left passenger floorboard hinge..Sir I kiss the ground you walk on..

John.

Posted by John Hopkins
 - January 28, 2013, 13:36:14 PM
Quote from: Troll on January 28, 2013, 08:49:46 AM

There is a little black, plastic cover located just ahead of the swing arm pivot, on top of the arm. It's secured with a chrome bolt and a phillips screw. The wiring harness plug for the rear fender lives under there.

Thank you That will save me a lot of fumbling around..I will try that tomorrow..

John.

Posted by Troll
 - January 28, 2013, 08:49:46 AM

There is a little black, plastic cover located just ahead of the swing arm pivot, on top of the arm. It's secured with a chrome bolt and a phillips screw. The wiring harness plug for the rear fender lives under there.

Posted by John Hopkins
 - January 28, 2013, 07:47:30 AM

Hi I need a little help..

I am installing an alarm with all the whistles and stops but I need to tap in to the live side of the left and right indicator wires as close to the fusebox as possible..This is a model J...It looks like I am going to have to remove the rear fender but if the wires come out near the fuse box I don't want to strip the fender if I don't have to..

Thanks..

John.

SMF spam blocked by CleanTalk