We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by CDNRatMan
- January 24, 2013, 11:17:01 AMWOW never thought of that tractor seat but you are right have to check that out......it is $49.99 from Ikea, I'll have to order one in black and see which looks better.....
Posted by Drift1
- January 24, 2013, 05:50:55 AMKW thanks for the bit of advice about tapping new holes.Think that's the route I'm shooting for,especially being I just picked up a new tap and dye set for the shifter kit install.A man and his new toys...LOL....I also checked around for them plastic plugs for spares,if and when I find them I'll get a few for you and RATMAN.
Posted by 49Reo
- January 23, 2013, 21:34:04 PMLooks good! You should mount that tractor seat in the corner on your bike too, might start a trend, man!
Regards and such,
49Re0
Posted by CDNRatMan
- January 23, 2013, 19:29:28 PMok I am going out to the auto places tomorrow an dkeep looking, have you thought of ordering them from Guido?
Thanks for all the help too, and ideas see what happens when people work togather.....
Posted by kw-retrorider
- January 23, 2013, 19:13:55 PMRatman - Nice! The installation looks good on your machine. Don't mind you horning in with a few more pictures. Anyone considering these can now see the details of the install. I'm still looking, but would appreciate it if you can find some metric caps. If you do...two please, so I have one spare. The bike looks right with the black bars on it.
Drift1 - You can't just use longer bolts, because the tab that holds the bars together is not flat...it's angled. So, you'd have to bend the original horn bracket first, which is what I thought I was going to do, but then I thought why should I bend the stock bracket if I could just remount it. Drilling two holes was easy. If you want to go one better, drill and tap the holes, then you won't need a nut on the back side. So agree with the Ratman, because it gives him options to mount other horn configurations.
Well done all around boys.
Posted by ChilliDrift
- January 20, 2013, 10:14:01 AMYep! Looking good!
Posted by pcarrell
- January 20, 2013, 10:00:59 AMThat's righteous looking!
Posted by CDNRatMan
- January 19, 2013, 21:25:25 PMlol hero knobs...have to remember that ............I'll take your word for the rest of it.....
Posted by Troll
- January 19, 2013, 18:06:04 PMDon't worry about cornering, the back edge of the floor boards will touch down first. The hero knobs on the bottom will let you know....
Posted by Drift1
- January 19, 2013, 17:12:03 PMLOOks fantastic dude!Thanks for sharing all the pics......
Posted by CDNRatMan
- January 19, 2013, 16:26:49 PMthis took all of about 15 mins total time to mount, if you are not going to make mods to the horn mounting, 10mm socket for the horn, and 14mm for the bolts on the floor boards brackets. and a couple of pics from a different veiw and it does look good...
Posted by CDNRatMan
- January 19, 2013, 16:23:48 PMnow some pic's as to my wondering about cornering ability...and to horn in on KW's pictures too but I stayed away from the mirrors...
Posted by CDNRatMan
- January 19, 2013, 16:20:46 PM ok back to the engine guard, KW a body shop or auto shop should have them plugs, I could not find any here today as both auto shops were closed by the time I got to them.
I put the guard on today.....just wondering now how it will effect my cornering ability, not that I am a cafe racer corner taking person on this ride.....
Some info on mounting the motorsloop guard....
Posted by Drift1
- January 18, 2013, 07:22:08 AMI don't want to mix this thread guys so I'll start a new one.
Posted by ChilliDrift
- January 18, 2013, 06:46:41 AM 
Im looking to change horns. Those little squeakers suck. I think someone mentioned getting a stock car horn from the auroparts store. Cheap and loud.