Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by hawkfan
 - January 13, 2013, 11:24:52 AM

I installed a light bar which required relocating the front turn signals to the light bar.  I wired the light bar per the instructions into the headlight wiring.  I took care during the splicing in the turn signals not to cross wires.  Now I'm not getting power on the blue wire feeding the left turn signal.  Also, now for some reason, the tail light/license plate light stay on even with the key in the off position.
Maybe I'm getting old and short tempered but I'm at the point of ripping out all the wiring stem to stern and installing new.  Before I do that I was hoping one of you members may have experienced similar situations in the past and could lend your knowledge.
Thanks in advance for any assistance one can offer.

SMF spam blocked by CleanTalk