Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - December 21, 2012, 20:37:07 PM

  that has crossed my mind and I'll do some of it, but also going to mock it up and wire it and see what happens then go from there. But it will work out......

Posted by 49Reo
 - December 21, 2012, 20:23:20 PM

Just take a grinder and grind off a bunch of the powder coating to ensure a good ground... :o...NOT! it might interfere, if it does, just run a ground wire from the ground wire in the light housing back and ground it on the original signal light ground.

Regards and such,
49Reo

Posted by Drift1
 - December 21, 2012, 20:21:55 PM

RATMAN,that's going to look nice on the ride,my man!As far as effecting the ground for the wires your boat mechanic bud will have no problem

Posted by CDNRatMan
 - December 21, 2012, 14:10:36 PM

  So could not find an original black light bar for my bike, but found a chrome one, so took the chrome on to the powder coating place here in town. Here is stock one and before powder coating and then after powder coating...

My only question is, and something I did not think of prior to doing the powder coating, is the powder coating going to affect the ground of the lights? Not a big deal I have a buddy who is really good with car wiring and lights and things, he is a boat mech so he can help me out...

SMF spam blocked by CleanTalk