Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by pcarrell
 - October 24, 2012, 19:27:52 PM

I wasn't aware of a rim difference.

Posted by Troll
 - October 24, 2012, 19:22:50 PM

The 150/80-16 from the 1500 requires a 3.5" wide rim. I believe the 140/90 16 tire you have uses a 3.00" rim. Wider tires have an effect on handling...usually slowing it down.....

Posted by pcarrell
 - October 24, 2012, 19:20:01 PM

A 150 is stock on the rear of a 1500, so if it'll clear the chain it'll fit the fender (800's and 1500's use the same fender  ***I stand corrected, see below***).  As for the front, I wouldn't see why you couldn't step it up to a 140.

Posted by hoosierfish
 - October 24, 2012, 18:59:13 PM

Yep, your right on the fender movement issue, don't have to worry about that. Guess I need to do some measurements at the chain location. I have factory installed tires now that are 140 rear & 130 up front, I'd like to go with a 150 rear & 140 front?

Posted by pcarrell
 - October 24, 2012, 18:49:21 PM

Since the fender moves with the swingarm it shouldn't make any difference if you're under load or not.  The bigger issues would probably be fender side clearance and chain clearance.

Posted by hoosierfish
 - October 24, 2012, 17:58:47 PM

Anybody install wider tires on stock 800 Drifter rims and have no issues with them? ie; rubbing on fenders under full load :-\

SMF spam blocked by CleanTalk