Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - October 19, 2012, 20:33:27 PM

Sounds like you need to do some work on the carb... sounds like a stuck float... I'd think about rebuilding the carb personally.

Posted by leigeberj
 - October 19, 2012, 20:12:10 PM

For a while now (maybe 3-4 months) the bike hasn't started without the choke being out, even when the engine is warm. The choke won't stay out by itself; it pops back in. So you have to hold it until the bike's ready to go. Other than that the bike has been running fine. I thought I was smelling gas a little bit here and there when I went to get on it, but not enough to concern me. Then day before yesterday, I went out and gas had leaked out all over the engine. It had puddled in some low spots and there was a puddle underneath the bike. From what I can see, it's dripping from something behind the air filter. I took the air filter off and it was damp with gas. Seemed to me like there might be something stuck in the carb. Sprayed some carb cleaner. It doesn't seem to have helped anything. I took the bolts out and got back behind where the air filter attaches and saw that a hose was loose, but I think i may have done that when I was messing with it the day before. I reattached the hose and gas is still dripping. I'm pretty handy and have done some very basic mechanic work, but I haven't done much of anything with carburetors. And I can't figure out what's going on with this. Any help would be much appreciated.

SMF spam blocked by CleanTalk