We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by 56Drifter
- September 19, 2012, 19:04:17 PMThunder Manufacturing makes some aftermarket (better than stock) steel clutch plates.
It's called the Duo clutch and it DRAMATICALLY improves the power to the rear wheels and all you have to do is look at the reviews. It part # is T-1500 DC...hope this helps.
Let us know.
Posted by vagabondjay
- September 19, 2012, 16:16:54 PMok got it.. thanks again for the help...going to order the stuff on Monday should have it by wend and do the job next Sunday.. I have a run to Gary Indiana...going to be a great ride.. I took the bike to Pensacola fl this past weekend.. clutches does fine after a 2 mile warm up ride. but I just want to have a new one for that Indiana run.
Posted by chief
- September 19, 2012, 15:05:35 PMGive them the part numbers on the page I gave you above. They ARE the most current. If you give them the bike and year you will get the current spring, but only ONE holder. The two holder setup helps prevent premature stress failure of the spring. The two holders fit together in the same space as the single holder.
Posted by vagabondjay
- September 19, 2012, 13:53:07 PMok explain the two holders... 
that's what is throwing me off. I see in the diagrams a spring holder, so what is the difference in the 2??
also so let me just clear my head.. and ask this. so if I walk in the dealer and ask for clutch spring,friction plates and two spring holders that I will get the most current parts?? my main concern is that I get a clutch spring plate that isn't going to give out after 6000 miles or 10k miles... I had 70k miles on my vtx and I was the original owner and I never put a clutch in that bike!!and it was still going strong. and from everything I have read about the clutch problems I don't wont to have to go into the case in a month or two. and thanks in advance for all the help and answers
Posted by chief
- September 19, 2012, 12:16:50 PMThe link I provided goes to the accessories area. Within that area is BARNETT Performance. That link goes to their website... steel plates are listed there from my reading.
Friction Plates (Qty.): ()Steel Plates (Qty.): 401-45-063014(AR) 401-45-078014(AR) 401-45-089014 (AR)
Spring Kits: 502-00-01025 (H.D.)
Clutch Kits: *302-45-20018
They are also active Kawasaki parts so you can get them from any dealer, or from a discount MC parts place like Ronayers.com. They are about $8 each online.
You need to measure the clutch pack before you spend a bunch on steel plates. These plates come in 3 sizes which have to be placed as required to ensure the pack meets the operating spec.
1308913089-1075 - PLATE-CLUTCH,T=2.0 AR
13089A13089-1080 PLATE-CLUTCH,T=1.6 AR
13089B13089-1081 PLATE-CLUTCH,T=2.3 AR
Usually, you don't need them. I replaced the friction plates, upgraded to two holders and replaced the spring plate with the one currently used on all 1500/1600's. I didn't need to replace the steel plates.
Posted by vagabondjay
- September 19, 2012, 10:50:31 AM@rawv..sounds like a plan.. I went by the dealer today and for the friction plates,gasket and clutch spring it was 171.00 out the door.
Posted by rawv
- September 18, 2012, 23:01:43 PMI've got a 99 1500 and the clutch was slipping bad I replaced the fibers..springs and the two spacer washers also the case gasket it was an easy fix easier than I thought and it runs great not a bit of clutch slip..the steels were fine I just scuffed them up with some sandpaper to take the glaze off and that was it.
Posted by vagabondjay
- September 18, 2012, 20:45:31 PMyes I typed that part number in and looked it up and it is only the friction plates...
Posted by chief
- September 18, 2012, 20:04:20 PMDid you look in the BRAKES and CLUTCH section of the Accessories database on the web site? Last time I looked Barnett Performance had a kit...
http://www.vulcandrifterriders.com/reviewpost/showcat.php/cat/8Posted by vagabondjay
- September 18, 2012, 18:53:33 PMso I am gearing up to put a clutch in the bike..has 54k miles on it. so I found the links to the clutch part number and what not.. so I am doing a Google search for a clutch kit.. all you will find is the friction plates. SO my question does no one sell a complete kit together?? friction plate,steel plate,spring and gaskets?? seems like a pain in the ass to order from here and there and then the shipping will kill you.. the only place I found was sherms gorilla clutch, I sent them an email to see about the gasket and have gotten no reply? and from what I am seeing all the clutch's are the same in the vulcan1500 and 1600.. and also from what I get out of this you don't replace the steel friction plates unless they are worn. next to the part numbers it has Ar= as required and since they don't come with the kit anywhere on the planet that's how it comes across