Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing: Last Edit: September 19, 2012, 12:20:45 PM by chief

The link I provided goes to the accessories area. Within that area is BARNETT Performance. That link goes to their website... steel plates are listed there from my reading.

[b][size=2]Friction Plates (Qty.): ()[/size][/b]
[b][size=2]Steel Plates (Qty.): 401-45-063014(AR) 401-45-078014(AR) 401-45-089014 (AR)[/size][/b]
[b][size=2]Spring Kits: 502-00-01025 (H.D.)[/size][/b]
[b][size=2]Clutch Kits: *302-45-20018 [/size][/b]

[size=2]
They are also active Kawasaki parts so you can get them from any dealer, or from a discount MC parts place like Ronayers.com. They are about $8 each online. 
[/size]
[b][size=2]You need to measure the clutch pack before you spend a bunch on steel plates. These plates come in 3 sizes which have to be placed as required to ensure the pack meets the operating spe[/size][/b][b][size=2]c.[/size][/b]

[size=10px][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089[/url][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089-1075[/url] - PLATE-CLUTCH,T=2.0  AR  [/size]
[size=10px][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089A[/url][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089-1080[/url]  PLATE-CLUTCH,T=1.6  AR
[/size][size=10px][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089B[/url][url=https://www.kawasakiepc.com/PartList.cfm?cNodeID=85167]13089-1081[/url]  PLATE-CLUTCH,T=2.3  AR  [/size]

[size=2]
Usually, you don't need them. I replaced the friction plates, upgraded to two holders and replaced the spring plate with the one currently used on all 1500/1600's. I didn't need to replace the steel plates.[/size]

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by vagabondjay

- September 19, 2012, 10:50:31 AM

@rawv..sounds like a plan.. I went by the dealer today and for the friction plates,gasket and clutch spring it was 171.00 out the door.

Posted by rawv

- September 18, 2012, 23:01:43 PM

I've got a 99 1500 and the clutch was slipping bad I replaced the fibers..springs and the two spacer washers also the case gasket it was an easy fix easier than I thought and it runs great not a bit of clutch slip..the steels were fine I just scuffed them up with some sandpaper to take the glaze off and that was it.

Posted by vagabondjay

- September 18, 2012, 20:45:31 PM

yes I typed that part number in and looked it up and it is only the friction plates...

Posted by chief

- September 18, 2012, 20:04:20 PM

Did you look in the BRAKES and CLUTCH section of the Accessories database on the web site? Last time I looked Barnett Performance had a kit...

http://www.vulcandrifterriders.com/reviewpost/showcat.php/cat/8

Posted by vagabondjay

- September 18, 2012, 18:53:33 PM

so I am gearing up to put a clutch in the bike..has 54k miles on it. so I found the links to the clutch part number and what not.. so I am doing a Google search for a clutch kit.. all you will find is the friction plates. SO my question does no one sell a complete kit together?? friction plate,steel plate,spring and gaskets?? seems like a pain in the ass to order from here and there and then the shipping will kill you.. the only place I found was sherms gorilla clutch, I sent them an email to see about the gasket and have gotten no reply? and from what I am seeing all the clutch's are the same in the vulcan1500 and 1600.. and also from what I get out of this you don't replace the steel friction plates unless they are worn. next to the part numbers it has Ar= as required and since they don't come with the kit anywhere on the planet that's how it comes across

SMF spam blocked by CleanTalk