Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by cochise
 - August 31, 2012, 22:01:30 PM

When I was a kid there was a fellow down the street with a  white 60's Norton that had a copper plated gas tank. I think its a stage in the  chrome plating process. It was wild looking and I've never seen another like that.

Posted by greenbarn
 - August 31, 2012, 10:50:57 AM

I'm a big fan of the looks of brass and copper.  I think I might like it.  Send pictures.

Posted by chief
 - August 29, 2012, 12:50:52 PM

I'm an old steam engineer... USN... so I sorta relate to the Steam anything deal! You got me thinking about oiled bronze... i used a bunch of that in my office/irish pub... might try that on some old parts!

Posted by 45 Bravo
 - August 29, 2012, 12:35:31 PM

Oh, NO.....
Not that word...

Well, maybe just a little, I have been pondering what to do about the mismatched parts on the front end of the drifter since I got it.
While I don't like the all black, I don't want all chrome either.

I think the combination of aluminum, black, gold and chrome, MAY be appealing..

The reason for the mismatched parts?
When I got the title from the previous owner, it was clean, I sent it off to get it in my name, it came back as a "reconstructed" title.
I called the state, they say that that vin number was listed on an accident  insurance payout.

Apparently the previous owner had wrecked it, and had it rebuilt, (after several calls to the shops in the surrounding area I found the shop that fixed it), it was backed into by a pick up truck while the bike was parked.

45 Bravo

Posted by Troll
 - August 29, 2012, 11:05:45 AM

Going steampunk?

Posted by 45 Bravo
 - August 29, 2012, 10:18:17 AM

Yea, I stopped before it got too painful, and the ride home seemed to soothe the gray matter..

Something for you to ponder..

While i say brass & copper, i don't mean all of it.

While i like the black on the 99's and 2000 drifters, but I think there is too much black, and I am not a fan of chrome either, that is why i like the blasted side covers & heads.

Mine is a mixture, my levers are silver, the switch housings are black, the front brake fluid tank is black, the clutch tank is silver, the headlight & handle bars are chrome, as are the grips, (with 1 inch rubber squares on them), and the light bar is black, with chrome spot lights.

I think i would like the black bars, but not sure.

The only parts I am talking about brassing are the fluid tanks to make them uniform, and the fittings that attach to them a copper color.

Also, the grips where they are chrome, make them a brass color in between the rubber pads, and on the grip end caps, copper accents.

Just a few little colorful accents to the overall scheme.

I better stop before I hurt myself again.

45 Bravo

Posted by CDNRatMan
 - August 29, 2012, 07:08:09 AM

 ::)When I read the title this morning I was some what worried you may have hurt yourself, but you bring up a good point.

Me personally I like the plain understated look on a bike or truck. Not a huge fan of chrome. I plan over the winter to take the levers off and a few other peices and have them powder coated flat black.

But I would like to see the results of your endevour, if you added some green to the black and mixed it properly it would have that look of distressed brass. Also would depend on the colour of the tank and fenders what it comes out like, but an interesting thought.....now I'll sit at my desk and ponder this for the day.

Posted by 45 Bravo
 - August 29, 2012, 01:26:47 AM

Hi guys & gals, I sat on my bike this afternoon getting ready to go home, I looked at my chrome grips, black clutch/Brake /mirror & switch mounts, black brake fluid tank, and silver clutch fluid tank, and chrome bars, when a thought crossed my mind...

How would they look brass colored..

I mean painting them, brass colored, maybe with copper accents.
Not Polished brass, but kinda aged brass, with a little black airbrushed around the edges to look aged. then clear coated for durability.

Anyone got any ideas?

I may shoot a photo or 2 and play with photoshop a little as a preview to see how it may look. (I am a graphic artist)

Before i paint a bike, i always scan and copy the side view of the bike from the manual, and try different paint schemes, and pin striping on there many times before i finally decide to do the bike.

Any input is welcome.

45 Bravo

SMF spam blocked by CleanTalk