Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - September 13, 2012, 17:42:05 PM

That's going to be a pretty extensive file. I'll scan it for you, but I'm pretty sure you don't need the whole thing. If you want it, I can send it to you as a .pdf via email. If it were me, I'd start by disconnecting the plug going to the rear section, located behind the plastic cover just above the drive shaft. All the wiring comes together for the lights inside the headlamp housing, so that's the next place to look. The last place I'd go would be where the harness comes out from under the fuel tank...Does it pop right away, or does it take some time to go open?

Posted by michaelh42
 - September 13, 2012, 13:31:29 PM

Hi All,
I started blowing a fuse for my taillight and dash.  Spliced in at somepoint I have my front driving lights.  I unplugged the driving lights without any luck.  Not sure where the short is at this point.  Does anyone have a copy of the wiring schematic that I can use.  I never realized how many wires are on this bike. By the way it is a 2001.
With weather as nice as it is I really want to get some riding in but kinda need that brake light....
Any help would be great!
Thanks,
Michael

SMF spam blocked by CleanTalk