Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - July 03, 2012, 16:43:55 PM

There is no "front shock"... you have springs in oil inside the front forks. You should check the fork oil level and springs.

Posted by greenbarn
 - June 30, 2012, 17:10:16 PM

I have a 2003  800 with 16000 miles.  To me, the front shock seems pretty soft.  I put on a fork tool bag on the front and immediately I started getting scuff marks on my front fender where the fender comes up and hits the bag.  There is approx 4-5" clearance from the fender to the bag.  When I sit on the bike I can very easily push down the front end to make the bag hit the fender - this seems awfully soft to me.

I thought maybe I was low on air pressure, but I looked up in the manual how to adjust the front shock - and found no way to adjust air or otherwise.  Evidently it's just not adjustable.

So here's my questions:  should the shocks be this soft?  Should I consider changing the oil, or maybe changing out the springs, or what???   If so, is this something I can tackle without a bunch of specialty tools?  I think I can handle it mechanically, and have an auto repair shop, so basic tools are not a problem - I just see in the manual they call for several "special tools" and I didn't know if these are mandatory, or if other basic tools can improvise???

THANKS in advance for any help.

SMF spam blocked by CleanTalk