Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - July 02, 2012, 15:32:33 PM

http://members.shaw.ca/drifter1187/bypass.htm
This is done on a Drifter...probably not as expensive as a stainless kit from Holland.

Posted by Troll
 - July 02, 2012, 15:25:49 PM

I believe there is a thing called a "dutch bypass" that might be what you are looking for.
http://home.insightbb.com/~kpmh.010/N-Dutch-Bypass.htm

Posted by backtowork99
 - July 02, 2012, 15:05:21 PM

Thanks..so, if it's not CA , then it can be removed, and cap off pipes?..or is that not possible?..

Posted by Troll
 - July 02, 2012, 13:53:29 PM

Commonly referred to as either the goat bladder, or goat belly, that is a "pre-muffler/collector". If the bike has California emissions, that's where the catalytic converter would hide...This is an "open loop" injection system, so there is no O2 sensor.

Posted by backtowork99
 - July 02, 2012, 13:20:05 PM

Greetings..just purchased, but haven't pick up yet, a 1999 1500 drifter..checked out a bunch of posts looking for an answer..it's probably out there, I just missed it..the bike is bone stock except for the seat..my question is, on the exhaust there is  a black thing( convertor?) with 3 elbows, connected to the exhaust..can this be removed and the exhaust holes capped?, or is there an O2 sensor for the fuel injection connected to it..doesn't look like aftermarket exhaust have one..I would prefer to keep the stock exhaust system..thanks

SMF spam blocked by CleanTalk