Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by ratze
 - March 25, 2012, 18:28:40 PM

first off, have a cold beer. then check all ur ground connections an RIDE ON.

Posted by asklapios
 - March 25, 2012, 18:22:50 PM

the battery ----ok
the junction box -- ok.--all fuses 10 A --- is it right?
all connections---ok
start switch turn on--ok
ignation switch turn on--ok
then starter motor ---works--on
but doesn't work fuel pump and other ignation systems...no FI lights...
what should i do ?

Posted by chief
 - March 23, 2012, 09:36:40 AM

You need to do some troubleshooting to determine if it is the ECU. There are MANY more likely things that cause what you describe.

Start simple, make sure switches are in the right position and connected properly, check battery and fuses.
Posted by KsDrifter
 - March 23, 2012, 08:50:09 AM

Not to be an ass, but what process did you use to determine if it was the ECU? When you flip the key on, do you have any power anywhere? How many volts do you have at the battery?

Posted by asklapios
 - March 23, 2012, 04:44:47 AM

Is this real? My Drifter - 99 1500cc - was dead. because my ecu is dead... what can i doing my ecu problem...

when i wanna start my bike than i turn to the  ignation switch and i doesn't hear fuel pump and i doesn't see no FI lights my speedometer.i have serius problem my ECU...

buy a new ECU or compatibilities a different motorcycle ECU?

help...please...

SMF spam blocked by CleanTalk