Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 1500 only
► Modify message ( Re: Vance and Hines Longshots )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

Hi Cincydrifter99, I just finished that mod. Haven't even painted the bracket yet. FYI, when I did mine, if I used all the parts as is, the left pipe was too close to the bike in comparison, and too far back by about 2". Also, the crossover pipe sat about 1/2" from the rear tire; too close in my opinion. The first thing I did was make the muffler bracket so the muffler hung exactly the same as the right side muffler. The next step was modifying the rear head pipe to line up to the muffler.The rear head-pipe is manufactured in 2 pieces and welded together; I cut it apart at that weld, removed 1 1/4" and cut the crossover under where the left heat-shield sits. I mounted the head-pipe just snug enough so it would sit by itself, but could still be moved; then lined up the cut pieces and tack welded them in place on the bike; then removed the part, and welded it on the bench.[glow=red,2,300][glow=red,2,300][b] Note: when welding on the bike, put the ground clamp as close to the weld as possible; this prevents the electrical current from traveling through the bike.[/b][/glow][/glow] I welded my head pipe together with a wire feed; if you have access to a TiG welder that might be your best choice. By doing the mod this way, the pipes hand perfectly to each other. I'm not sure if the person who posted this mod originally had these line up issues or not; is article in the mods/tips section didn't mention it. I hope my rambling on here is of help; good luck and keep us posted.

Regards and such,
49Reo

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by cincydrifter99

- March 10, 2012, 21:23:31 PM

Thank you! for posting the part numbers. I have really been wanting to do that mod. Now just gotta save up for it......

Posted by 49Reo

- February 03, 2012, 20:07:28 PM

FYI, when I ordered a set of Longshots for my 1500 Drifter today, I was told by the dealer that Vance and Hines is discontinuing the Longshots for the Drifter. Also, if anyone is looking to convert their Longshots to "true duals" (one down each side) as per the posting in the Mods/Tips section, here are the V&H part #'s needed:

K-305 F (V&H rear head pipe for V&H bagger duals for Nomad) V&H price: $71.05

K-301 HC (Right-side rear head pipe heat shield) V&H Price: $53.85

K-302 HC (Left-side heat shield for exhaust elbow) V&H Price: $54.78

Regards and such,
49Reo

SMF spam blocked by CleanTalk