GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by annieoakley
- October 09, 2009, 08:13:09 AMThanks guys!
Posted by pcarrell
- October 08, 2009, 17:50:42 PMAnd there you have it!
Honestly, I don't know a lot about them. You could also ask your question here: http://forums.delphiforums.com/KawasakiDrifter/messages/?start=Start+Reading+%3E%3E You'd probably get a few more answers there.
Posted by chief
- October 08, 2009, 16:34:52 PMWater in the hypercharger is a problem I've heard of before.
The FI2000 first generation (I have that) only has two pots. These things only ADD fuel, so the closer to zero, the leaner it is.
Try settings of 1-3/4 on pot 1 and 0 on pot 2.
Posted by annieoakley
- October 08, 2009, 14:44:45 PMokay Phil,
Time to pick your brain. I got my bike home yesterday (yuck! it looked like I took it to the mud drags! lol) After a good washing and polish I pulled the seat off and found the power commander to be a cobra Fi2000. I pulled the plugs to see how fouled they were. The rear cylinder plugs weren't too bad but the front cylinder plugs were toast. definite signs of way too rich on the fuel. After talking with Jake his thoughts were one of the issues was running in the rain with that hypercharger, his opinion was it could have been sucking water through the filter causing things to foul. If you have any info for me on the Cobra settings let me know, or if you have any other thoughts I'm open to suggestions. Oh, by the way I worked on the tail light issue. Easy fix, I took the bulb out and there was a small piece of solder that had broken off of the base of the bulb causing it to lose contact. I put the bulb back in and now the tail light is working like it should but I am going to make a quick trip to NAPA and get a replacement anyway. Thanks for your help!