Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - September 20, 2011, 11:36:35 AM

Yes, and its dangerous to ride with one bad shock.

Some folks have used the 412's. I rode with them for one ride... they did fine, but I already had ordered the 440's. The place I was using back then had ordered the wrong ones. I just took them and re-ordered the 440's... then sold the 412's.
With the floating fender, shocks are really important.
Posted by 45 Bravo
 - September 19, 2011, 20:45:24 PM

Thanks, Well, i have 1 shock that is shot, so i either need to find another, or upgrade.

the 440 shocks are HOLY MOSES priced.. even on ebay.

but gotta do something.

what others would you suggest?

45 Bravo

Posted by chief
 - September 19, 2011, 14:19:59 PM

Well, kaw has the shocks set up for 175# from factory. They should be bumped up considerably... I had about 45psi in mine... which is the max end of the range... and pre-load set to 4. Still didn't like it. If you see oil leakage, its likely the shock is history.

The 440's are plenty heavy duty... there are others that would likely work as well. You don't want the thing to ride like a rigid!
Posted by 45 Bravo
 - September 18, 2011, 21:05:29 PM

Hello, I am going to ask a question here that has been covered before, but maybe not into the same detail as i need.

Today my wife and i were riding the drifter 1500, and hit a rather larger bump in the road, and bottomed out pretty good, after getting home and after the bike cooled i was cleaning it up and noticed the left rear shock leaking oil.

It is stock, and was set at the factory pressure i am sure.

a couple of questions:
1. is it possible to fix the shocks?
2. Others have suggested the PROGRESSIVE SUSPENSION HEAVY-DUTY 440 IAS SERIES SHOCKS.
what is their max loading?

together we are tipping 500+ Lbs.

3. what are some of my alternatives to carry this load?

I notice they have a 812 series shock on the progressive site also. Does anyone know if it is heavier rated than the 440?

Essentially, i am asking what can be done to make the drifter carry say, 600 lbs. of crew & gear?

Thanks.

45 Bravo

edit: I also saw something on the HD ultra classic shocks, are they any better or heavier duty than the factory drifter shocks

SMF spam blocked by CleanTalk