Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by DriftinAway
 - September 08, 2011, 18:50:27 PM

Hey guys... just picked up an 800cc Drifter yesterday and I noticed last night the chain was VERY VERY loose ... it had about 4 inches of play in it... reading online I found that 1 inch to 1 1/4 is considered acceptable. Well I don't have a lift or a jack to get it off the ground so I took it to the stealership today to have the chain tightened. Well of course it wasn't just a simple fix ... seems the chain is about gone and the sprockets are worn almost completely off on one side... so as the wheel turns the chain is tight then as the wheel moves to the other side of the sprocket it gets very loose.... well they quoted me $340.00 for both front and rear sprockets and a new chain plus 1 to 1.5 hrs labor. Does that sound about right to you guys? Seems like a lot for a chain. The chain alone was $130 - then the rear sprocket was 40 and the front $30 ... plus 1.5 hrs labor at $80 an hour. If I had a way to get this up in the air I think I would try to do it myself to save $160 bucks.... please let me know if this price sounds reasonable to you guys.... thanks for your help!!!

SMF spam blocked by CleanTalk