Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by aclone
 - August 20, 2011, 11:30:32 AM

Progressive 440 or if your riding two up 440 HD .  When its time to change the fork oil put progressive springs in.
Mark

Posted by jagered
 - August 20, 2011, 10:47:12 AM

i have a 2002 and the shocks seem to be "sloppy".  i have verified at least one side is getting pressurized and the other i could not - so i took it to a dealer and they said they had no problems?!?!

i don't get it... i have a small hi press pump for my mountain bike shock and can get PSI in the right side, but the left side never shows any pressure?!?  any ideas?  i found a bunch of replacement shocks but which would be the best one and the easiest...

Phat Performance has a 412, 416, 418, 430, 440 and 812 series???  would any one of them be better than OEM?

thanks

EDIT - ok, tried it again and made sure all weight was off the rear and the tire spun freely... got pressure into each shock.  now, question about PSI and Dampener Setting... I have read that 71PSI is the absolute max and the dampener setting is 1 to 4 for soft to hard (4 being hardest)... is this right?

SMF spam blocked by CleanTalk