Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Crash13
 - July 09, 2011, 16:24:00 PM

Hello.  I've never posted here before so consider this my greetings to you all and an introduction....with a question  ;D  I have a 2003 1500 that will not start.  I turn the ignition on, hit the switch and hear nothing but a bunch of clicks.  The battery has full charge and all fuses are fine.  Checked connections and they all appear to be tight.  I figured maybe it was the solenoid that had gone bad but when I bypassed the solenoid with a pair of plyers all the lights shut off and it sounded as if the starter was grunting but would not turn over.  I'm not the most mechanically inclined person but is it safe to assume since bypassing the solenoid did not make it fire right up that it is the starter that bit the dust?  Please help!

SMF spam blocked by CleanTalk