Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by griz01
 - July 12, 2011, 06:57:19 AM

did not state what year you have, but on the 99 & 2000 the light below the FI is the oil warning light, stays on until bike has oil pressure, don't know if the 01 & up are differant,

"Topping off" coolant, is possible by using the expansion tank under the side cover on the bike. Fiil tank to the full mark, go for a ride, let cool down and check the coolant  level in the expansion tank; repeat as needed. The level should remain fairly constant. Should not need to be "topped" unless there is a leak somewhere

Posted by plevine1
 - July 11, 2011, 22:13:23 PM

I checked my FI Indicator for errors and the good news is that it doesnt reflect any.
When I turn my key to the on position (without starting bike) my temp warning light (directly below FI indicator light) remains on until I actually start the bike, it then turns off. No other lights remain on.

Is the only method of topping off the cooling system (assuming it's required) lifting the tank? Should the light turn off as do all the other lights?

SMF spam blocked by CleanTalk