Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - August 31, 2009, 02:39:33 AM

It's not an air shock is it?

http://www.vulcandrifterriders.com/shockadjust.html

You can also add a pre-load kit if you can't get enough adjustment on the shock.

http://www.scootworks.com/shop.cgi/page=partskawlower.htm/SID=1225464685.29558

Here's a breif description of the product:

Rear Shock Pre-Load Kit for The Vulcan 400 and 800 "A", Classic "B", and 800 Drifter

cheers

Posted by YorZephyr
 - August 29, 2009, 19:56:50 PM

I've seen that there are suggestions for adjusting the air shocks for the 1500 Drifter and I was wondering if it is the same for the 800 ???.  I have a 2005 800 Drifter and I need to learn to set it up for a 250 lb rider and would like to know what's best to setup for riding two up as well.  If I use the 1500 settings I put in about 20 to 22 psi for a 250 lb rider - is that correct?
Thanks in advance to all that reply!! ;D

SMF spam blocked by CleanTalk