Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 1SG CAV
 - May 25, 2011, 18:00:39 PM

Yes sir that'll be the baby you need.   It's the same on my 02  1500. no way to do it without that socket.  8)

Ride With Pride

Posted by 1999 Drifter
 - May 24, 2011, 22:16:37 PM
Quote from: chief on March 31, 2011, 12:35:24 PM

It must be a thin walled socket to fit... I went ahead and bought the kaw tool for that... there is one in the tool set that came with the bike BTW... cheap one, but it works.

would this be the one  RE: Kawasaki parts nation.com 92110B 92110-1153   TOOL-WRENCH,OPEN END,
When I went to change my plugs for the first time today since I bought the bike the LF plug, LR plug and RR plug went in with a 18mm spark plug socket but the RF plug could not be tightened using the 18mm spark plug wrench, it was too thick , as mentioned a thin walled socket would be the answer
My question is why would the above three work and not the RF jug plug is this normal for the 99?

Thanks in advance
Tim

Posted by plevine1
 - March 31, 2011, 13:47:23 PM
Quote from: chief on March 31, 2011, 12:35:24 PM

It must be a thin walled socket to fit... I went ahead and bought the kaw tool for that... there is one in the tool set that came with the bike BTW... cheap one, but it works.

I just bought an 18mm socket but (like me) is to fat. Now I need to find a thin walled socket.
Posted by chief
 - March 31, 2011, 12:35:24 PM

It must be a thin walled socket to fit... I went ahead and bought the kaw tool for that... there is one in the tool set that came with the bike BTW... cheap one, but it works.

Posted by griz01
 - March 30, 2011, 19:21:24 PM

It is all in the Numbers ;D

http://www.ngksparkplugs.com/docs/tech/design_symbols_plugs.pdf

Posted by plevine1
 - March 30, 2011, 18:58:15 PM

You beat me to the answer. 18mm is the winning size.
Thanks

Posted by Troll
 - March 30, 2011, 18:34:42 PM

The size is 18 mm....Just replaced my plugs yesterday

Posted by 1SG CAV
 - March 30, 2011, 18:10:06 PM

The spark plug gap is 0.8-0.9mm.  I had to buy a special socket to fit my 2002 1500. I believe the socket size is 19mm, but it could be 18mm.

Posted by plevine1
 - March 30, 2011, 16:37:59 PM

Anyone know the metric socket size required for the spark plugs along with the Gap setting. Thanks

SMF spam blocked by CleanTalk