GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by VN1500
- May 10, 2011, 14:50:15 PMQuote from: GIBBY on May 10, 2011, 14:17:20 PMI have RoadHouse Dooley's and have worked out a rubber mounting system for the mounts. Works great.
So.....tell us about it?
Ron
Posted by GIBBY
- May 10, 2011, 14:17:20 PMI have RoadHouse Dooley's and have worked out a rubber mounting system for the mounts. Works great.
Posted by chief
- May 07, 2011, 15:50:49 PMSaftek, 4288 Warren Road, Franklin, TN 37067
Thanks. When I post the info in the mods/tips - I will credit you.
Posted by VN1500
- May 06, 2011, 14:13:08 PMQuote from: chief on May 06, 2011, 12:58:28 PMRIGHT Classic footpeg... provides rubber mounting on the right side. The problem is the left side. That peg bracket is the same on the classic and drifter and isn't rubber mounted.
The hanger they use is solid mount as well... so you'd want to try to give some rubbermounting to that side. You might use the info provided by Troll and T-Stan to work out a solution. I don't have one for you.
Remember the whole point is to ensure the whole system is rubber mounted to eliminate vibration and stress points. Apparently a lot of folks live with both, so its up to you.
Lastly, if you would trace the left side classic/drifter hanger they provided to you and send it to me I'd appreciate it. I could use that to work up something for other folks to use. If you can scan it to scale and send it as a pdf... that's great, otherwise I will pay for postage. Yell and I'll give you the address.
Please keep us advised with your progress. Let me know if I can be of any help.
Hell, just post an address. i'll get it to ya
Ron
Posted by chief
- May 06, 2011, 12:58:28 PMRIGHT Classic footpeg... provides rubber mounting on the right side. The problem is the left side. That peg bracket is the same on the classic and drifter and isn't rubber mounted.
The hanger they use is solid mount as well... so you'd want to try to give some rubbermounting to that side. You might use the info provided by Troll and T-Stan to work out a solution. I don't have one for you.
Remember the whole point is to ensure the whole system is rubber mounted to eliminate vibration and stress points. Apparently a lot of folks live with both, so its up to you.
Lastly, if you would trace the left side classic/drifter hanger they provided to you and send it to me I'd appreciate it. I could use that to work up something for other folks to use. If you can scan it to scale and send it as a pdf... that's great, otherwise I will pay for postage. Yell and I'll give you the address.
Please keep us advised with your progress. Let me know if I can be of any help.
Posted by VN1500
- May 06, 2011, 10:53:22 AMQuote from: chief on April 28, 2011, 13:15:11 PMChief,Just to be clear - You can solid mount the pipes using the stuff in the box... its rubber mounting them that is the challenge.
On new drifters the pipes are rubber mounted through the goat bladder stuff. When people change out the pipes they remove that rubber mounting creating the potential for all sorts of problems from stress and vibration. No pipe mfg'r takes this into account for the drifter. All of their hangers are solid mounts. The OEM Vulcan Classic (1500) has a different setup. The pipes are hung from the right side foot peg bracket which has a rubber bushing mount. So using this bracket and standard classic pipe brackets gives you the rubber mounting. Plus it opens up a wide range of pipes available for the classic.
They are called... Rear Step Stay LH, and Rear Step Stay RH. And they are parts that can be purchased from Kaw.Dooleys are different because of the left side pipe. It appears Roadhouse provides a bracket that hangs from the left foot peg bracket. But neither provides any rubber mounting. So if you do the right side correctly it will be rubber mounted but the left side won't... As a result, you will need to fabricate a hanger which provides that rubber mounting/vibration control.
As I said at the beginning... you can go solid with what you have in the box (assuming the bike was set up for double seat with left side peg mount). Many folks have. I wouldn't based upon my brief experience with solid mounted pipes.
There are some mods/tips which provide some info on this subject over on the web site. They aren't specific for dooleys, but there is information which may allow you to create a left side bracket that is rubber mounted.
http://www.VulcanDrifterRiders.com/reviewpost/showcat.php/cat/71
Good luck and please keep us advised. We all gain from others' experience with these things!
Finally met with the seller & got the Dooley's
Looking at the parts in the box, it looks like I need to make one bracket. But [if] I follow what [/i] you are saying? I should buy a left foot peg bracket for a Classic, & then use what is provided by R/House for the Classic?
Ron
Posted by chief
- April 28, 2011, 13:15:11 PMJust to be clear - You can solid mount the pipes using the stuff in the box... its rubber mounting them that is the challenge.
On new drifters the pipes are rubber mounted through the goat bladder stuff. When people change out the pipes they remove that rubber mounting creating the potential for all sorts of problems from stress and vibration. No pipe mfg'r takes this into account for the drifter. All of their hangers are solid mounts. The OEM Vulcan Classic (1500) has a different setup. The pipes are hung from the right side foot peg bracket which has a rubber bushing mount. So using this bracket and standard classic pipe brackets gives you the rubber mounting. Plus it opens up a wide range of pipes available for the classic.
They are called... Rear Step Stay LH, and Rear Step Stay RH. And they are parts that can be purchased from Kaw.
Dooleys are different because of the left side pipe. It appears Roadhouse provides a bracket that hangs from the left foot peg bracket. But neither provides any rubber mounting. So if you do the right side correctly it will be rubber mounted but the left side won't... As a result, you will need to fabricate a hanger which provides that rubber mounting/vibration control.
As I said at the beginning... you can go solid with what you have in the box (assuming the bike was set up for double seat with left side peg mount). Many folks have. I wouldn't based upon my brief experience with solid mounted pipes.
There are some mods/tips which provide some info on this subject over on the web site. They aren't specific for dooleys, but there is information which may allow you to create a left side bracket that is rubber mounted.
http://www.vulcandrifterriders.com/reviewpost/showcat.php?cat=71
Good luck and please keep us advised. We all gain from others' experience with these things!
Posted by VN1500
- April 28, 2011, 06:56:13 AMQuote from: chief on April 27, 2011, 11:39:42 AMOK Chief, if I can secure those brackets I will use them. If I can get a good picture I can fab some up.I STRONGLY recommend you replace the Drifter foot peg brackets with CLASSIC footpeg brackets... then use the pipe brackets intended for the CLASSIC!
See, the Classic foot peg mounts (brackets) have rubber mounting integrated into the right side bracket. Drifter brackets do not have this... So with the use of the classic peg brackets and pipe brackets you get a rubber mounted exhaust... this eliminates a LOT of vibration and stress on the pipes. To be honest, I don't know if the left side bracket is "rubberized" or not. I'll have to research that!
Thanks for the instruction sheet Mike O... will include in the exhaust section of the website.
Even if I have neither, might be able to figure it out, when I attempt the install ?
Thanks again, Ron
Posted by chief
- April 27, 2011, 11:39:42 AMI STRONGLY recommend you replace the Drifter foot peg brackets with CLASSIC footpeg brackets... then use the pipe brackets intended for the CLASSIC!
See, the Classic foot peg mounts (brackets) have rubber mounting integrated into the right side bracket. Drifter brackets do not have this... So with the use of the classic peg brackets and pipe brackets you get a rubber mounted exhaust... this eliminates a LOT of vibration and stress on the pipes. To be honest, I don't know if the left side bracket is "rubberized" or not. I'll have to research that!
Thanks for the instruction sheet Mike O... will include in the exhaust section of the website.
Posted by VN1500
- April 27, 2011, 09:08:35 AMQuote from: Mike o on April 27, 2011, 08:33:39 AMThanks Mike, that will be a huge help!!This may help answer your question.
http://www.roadhousebrand.com/Merchant2/isheets/Kawasaki/56-165.pdf
Ron
Posted by Mike O
- April 27, 2011, 08:33:39 AMThis may help answer your question.
http://www.roadhousebrand.com/Merchant2/isheets/Kawasaki/56-165.pdf
Posted by VN1500
- April 26, 2011, 16:22:57 PMQuote from: chief on April 26, 2011, 09:40:23 AMThanks Chief, I just talked to the seller,he said the paperwork inside the box,says basically the same thing. He said there is a bracket in the box not marked,.....that may be it??I suspect it would be the same as using other classic pipes on the drifter... ie replacement of foot peg brackets ... By replacing the foot peg bracket on the drifter with a classic bracket you can use any classic pipes - plus they will be rubber mounted. But it all depends upon how the left side is attached. I haven't looked at it.
Since he & I live 100 mi apart,& he is willing to me me half way, & the price is right...We're going to plan & meet & I'll try,em.
If they workout? I'll have my R/H 2-into-1 for sale.
Thanks again,Ron
Posted by chief
- April 26, 2011, 09:40:23 AMI suspect it would be the same as using other classic pipes on the drifter... ie replacement of foot peg brackets ... By replacing the foot peg bracket on the drifter with a classic bracket you can use any classic pipes - plus they will be rubber mounted. But it all depends upon how the left side is attached. I haven't looked at it.
Posted by VN1500
- April 26, 2011, 07:49:01 AMDoes anyone know, if Dooley's for a 1500 Classic, will also fit a 1500 Drifter?
Thanks, Ron
Posted by chief
- April 18, 2011, 16:40:53 PMAs, has been accurately pointed out, all pipes are not created equal. Gibby has had success using corks (marbeling) to eliminate backfires on his particular installation. Others have not been so lucky. I prefer use of coasters and removal of the reed valves altogether, over marbeling. It is almost the same procedure. But even with those, backfiring may still occur especially on decel and you may end up requiring a FI add-on - as I did. I had to work my way into it... so try it and see if it works for you... if not go to the next level.
Keep us advised. Your experience adds to the collected experience of lots of other folks.