Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - May 10, 2011, 11:12:20 AM

I'd replace it... but you can take it to a body shop or tire shop and see if they can repair it.

But you know we have tubes in these tires. I suspect you have at least a busted tube... you will know when you take the tire off.

Posted by lumper
 - May 10, 2011, 09:41:10 AM

Hi all,
You guys are getting to know me a little by now, lol.
Check this out, I have been having a run of dumb luck, bad luck, dumb nonetheless.

So yesterday when I finally got the bike started after a weekend of diagnostics, I celebrated with a little ride, nothing to serious literally a little ride, 50 miles or so.

I go out this morning to pull the bike out, and I find a flat tire.

After closer examination I see a nasty bend in the rim near the valve stem .

I just filled the tire and an hour later is was flat again.

I dont think I have a puncture or anything, I believe the air leaked out from this bend in the rim.

Do I need to buy a new rim or is there anyway to safely straighten this one?

I was hoping I could pull off the rear fender and use a mallet and some rags or a block or something and bang it straight but I thought I better get some opinions on this before I go destroying my rim any worse.
After reading I see I need to pull the tire off the rim and there are methods but I dont think it is something I am going to be able to do.

What do you guys think?

I have been looking at used wheels on eBay and find for 150.00 to 250 for most.
Will a wheel from a 2002 vulcan 1500 classic that is spoked like mine fit?
Are there different years and models that will fit?
The more I read the less I think I can fix it.

it's something new and exciting every day with ole Lumper, started with the discovery of a valve cover gasket leak and now I am on a roll.

Thanks for any opinions and info,
Lump

SMF spam blocked by CleanTalk