Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 53Indian
 - September 05, 2024, 15:53:22 PM

Thanks for the info.
I looked at these on eBay, glad I didn't bother now.
Was gonna try the old style, centrally mounted Harley switch on the dash but wiring not my strong point, especially if resistors, ecu signals involved etc. 

Posted by mittico68
 - September 03, 2024, 08:32:16 AM

That's the price to pay, when you try to bypass the OEM sellers by taking the cheap chinese way...  ;D

Posted by drifter-paul
 - September 02, 2024, 21:44:43 PM

They incremented their offer to 70% with me to keep the modified lock .
I accepted that as I am off on a around Australia trip .

Posted by drifter-paul
 - August 17, 2024, 05:59:40 AM

UPDATE - Seller Reply

Dear Customer,
Sorry for the inconvenience caused.
We are sorry that such an incident has occurred and we sincerely ask for your forgiveness.
We can apply for a 20% refund as compensation for you. Do you think it's okay?
We look forward to your reply.
Of course, this is just a suggestion.
Please feel free to contact us if you have any questions.
Have a great day!
Best Regards，
Pete

MY REPLY
I will be gracious and assume your 1st reply was AI generated . This offer is NOT acceptable . Please get a human to read my correspondence . The unit failed Quality Control . IT IS MISWIRED - it will never work for any customer who buys this batch in this wiring format (Grey to left side of resistor instead of right). I have taken the courtesy of sending you photographs and a detailed description of this QC lapse to enable you to redeem your reputation by remediating this lapse . I have alerted USA, UK, German, Netherlands, Canada, Spain , Holland , Sweden, Romania & New Zealand fellow-owners of these Kawasaki motorcycles that I am awaiting your response . Thank You

THEN
I got an exact repeat of their 1st reply . Waiting for Ebay response

Posted by drifter-paul
 - August 17, 2024, 01:44:20 AM

Replacement Ignition switch from hotsaleshop-07 (China) - A$70 v A$400 local dealer

This is a 5 wire (3 position) Ignition key with a resistor. The resistor is detected by the ECU/ICU and a current is then sent to the fuel pump. If the resistance is not detected, the ECU thinks the motorcycle is being hot-wired(stolen) and will not send current to the fuel pump. The supplied item allows the starter motor to engage, BUT would not prime the fuel pump i.e. to start. The Grey wire was connected to the west end of the resistor, should be East,see photos - Now starts after re-solder - 2 technical men * 2hrs.

I have raised this issue with Ebay and the Seller . Will advise progress with Seller

SMF spam blocked by CleanTalk