GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by chief
- March 09, 2023, 21:00:34 PMMODIFIED THANKS to JMJ77: 03/10/2022
SPRING REAR SHOCKS ON 1999 (AND POSSIBLY 2000) EU, GERMAN and SWISS 1500 Drifters. AIR SHOCKS ON ALL OTHERS.
(English) 1999 1500 promo information indicated air shocks standard. Kaw official US site parts info refers to air shocks. USA and Canada were all air shocks and any found now without air shocks have been modified by previous owners.
People have changed out the rear shocks from the beginning. I have Progressive brand non-air on mine... added about 20 years ago or so.
Attached is the suspension pdf from Kawasaki for US etc.
Cheers
Posted by JMJ77
- March 08, 2023, 02:25:37 AMHi all, old topic but didn't start new thread because my question concerns "non air" oem shocks used on early 1500 Drifters. As BugzeeMalone said in first post, there aren't any air valves on 99' shocks. At first I was wondering that too, but you can see that from part diagram also. Maybe European version thing, don't know for sure. If I'm right, you can only adjust preload.
My question is, has someone changed oem spring to stiffer or progressive springs? Does any of you know, what is the stiffness of those oem springs? I can't open those shocks and check springs right now, because bike is in winter storage far away.
Maybe if there's no stiffer springs available, it's time to upgrade those shocks for some aftermarket shocks, will see.
Cheers, Jani
Posted by BugzeeMalone
- October 22, 2016, 05:24:44 AMThanks for everone's input. I appreciate it.
I am going to have a play with the set up
Regards
Ray in NZ
Posted by chief
- October 21, 2016, 10:43:09 AMThe OEM are fine but they require some work to get and keep them properly set. Personally, I replaced mine and believe they are much better than the oem.
Posted by BugzeeMalone
- October 21, 2016, 03:01:22 AMThanks so much for posting this photo.
I appreciate the fact that you had to remove it from your Drifter to do this for me 
Yes,the previous owner must have replaced them.
Are the std shocks any good? Is it worth picking up a set as I have always thought mine rode a little hard compared to my previous BMWs
Regards,
Ray in NZ
Posted by drifter-paul
- October 20, 2016, 04:15:43 AMAnything for a countryman from the Northern Islands. Course , I won't be able to go for a ride until I put it back on. 
Posted by BugzeeMalone
- October 20, 2016, 03:33:00 AMYes I was expecting them mounted on the top.
They look stock with 4 settings for preload.
They are black on top and chrome on the bottom with no exposed spring.
Could someone please post a photo of their stock shock for me please
Ray in NZ
Posted by drifter-paul
- October 19, 2016, 04:57:02 AMAir valves - as in like what you have on your tires to pump air into.
Black surround 3 3/8" at top, air valve at top, black sping & lower surround. If these don't describe yours, then you have aftermarket.
Posted by BugzeeMalone
- October 19, 2016, 02:59:43 AMI have read that the adjustable rear shocks on 1500 Drifters also have air valves. I looked on my 1500 99J model and I can't find any air valves. Did they come on later models?
Ray in NZ