Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (5 remaining), maximum total size 64.00 MB (65101.44 KB available), maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Clipboard01.jpg
434.56 KB
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Highc5555
 - May 09, 2022, 10:03:44 AM

bike.jpg

Posted by Highc5555
 - May 09, 2022, 09:41:17 AM

i recently completed the following upgrades (if they would work right) on my 99 VN1500j:

+6" throttle cables
Barons Big Air KIt
Hardkrome 2-1 Sideburner Exhaust.

I took the bike in to get custom mapped and dyno tuned and the mechanic said that he couldnt do it because the Throttle Position Sensor is telling the ECU that it is at 90%. I followed the manuals instructions on testing the resistance across the 2 pins on the ecu (resistance or voltage, i dont recall...) and it is supposed to be within a range of 4.(something)-5.(something) and it read 6.4. Could i have inadvertently bumped something whilst changing cables? is there a way to adjust the tps? (i found the gadget adjustment technique, however not for this exact problem. will that work to zero the tps back out?)

the mechanic also said that the injectors may be clogged. now i put 600mi on the bike before the new equipment was installed... could the tank removal have dislodged some material that clogged the injectors? To me it sounds like the mechanic just doesnt want the work... as he says hes a month out to work on it.  I wanna ride this thing so bad but it wont run right as is. PLEASE HELP!

SMF spam blocked by CleanTalk