Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - April 04, 2011, 00:06:33 AM

There are several types of boxes you can use. I don't recommend the PC unless you dyno the bike and use that to adjust the map. Other boxes let you screw around with them and adjust to your bike. You will get better performance from a PC with dyno adjusted map - so keep that in mind.

But, to simply be rid of problems introduced from a pipe change... the cobra worked fine for me.

Posted by 1SG CAV
 - April 03, 2011, 23:07:29 PM

If you change the air intake then you will need a Power Commander. I will say stay away from a Hyper- Charger. It will cause issue with the bike. AnneOakley and I both have hyper-chargers.  They do stick out from the side quite a bit. If you spend a couple hundred and have it dyno'd you'd get a little bit more power with one. If you change the air system you can't go back, with some changes (Hyper- charger is one) Chief is right you should need only the Cobra FI2000.

Posted by Mike O
 - April 03, 2011, 22:05:56 PM

Thank you. That is what i'll do.

Posted by chief
 - April 03, 2011, 20:32:34 PM

Well, I needed a box with only the addition of my Big Willys... most of the time you don't need anything. So, I suggest you install them and see. If you get backfires, decel popping etc... you may need to get a box. I got a Cobra FI2000 which did the trick with no adjustment.

Posted by Mike O
 - April 03, 2011, 19:54:01 PM

Hello,

I just order a set of Roadhouse Dooley's for my 2001 1500 FI.   Roadhouse literature states that no mod's need to be made?  I'm not planning on changing the air intake at this time.  Do I need something like a power commander?   I have no idea about this.  Also, the folks I ordered the pipes from said I didn't. Need new exhaust gasket?   Is that correct?

SMF spam blocked by CleanTalk