Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - February 23, 2020, 02:08:39 AM

ALL Vulcan 800,900, 1500, 1600 and 2000 have 1 inch. A couple of the 1700's had 1-1/4 (Voyager and Vaguero ). Most bikes have one inch, a few have 7/8 and fewer still have 1-1/4.

Posted by Bucko
 - February 23, 2020, 01:19:57 AM
Quote from: drifter-paul on February 22, 2020, 22:44:00 PM

Are the 2001 onwards Drifters, 3/4" ? The part is listed as fitting 1999/2000 for 800 & 1500 cc only.

They all have 1" bars.  The part numbers are different because M/Cs were black on the 99/00 and 'clear' on later models but are likely the same unit except for colour.
Posted by drifter-paul
 - February 22, 2020, 22:44:00 PM

Time for a new Master cylinder for my  '99 1500.

After replacing master piston kit, and a new hydraulic hose, I have bled, reverse syringe pumped, gravity (calipers/ bleed nipple at highest point) bled, pressure bled and can get it to work off the m/c. But it won't on the m/c !!!

Neither Ron Ayers or Partzilla  or Japan have the unit.

Who has had an alternative ? Harley ? The 1" handlebars restrict the choices available.

Are the 2001 onwards Drifters, 3/4" ? The part is listed as fitting 1999/2000 for 800 & 1500 cc only.

Thanks

SMF spam blocked by CleanTalk