We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by tj
- August 20, 2019, 16:50:39 PMQuote from: mittico68 on August 15, 2019, 02:42:24 AMSure brings out the curve in the fenders!And here's another brief update.
As you can see from the attached pics, I've added a (fake) chrome profile to ma-deuce.
IMHO, it really compliments the bike.
Posted by mittico68
- August 15, 2019, 02:42:24 AMAnd here's another brief update.
As you can see from the attached pics, I've added a (fake) chrome profile to ma-deuce.
IMHO, it really compliments the bike.
Posted by greenbarn
- May 13, 2019, 19:56:34 PMThat's looking good. I like the tail light.
Posted by mittico68
- May 06, 2019, 02:55:12 AMQuote from: mittico68 on May 01, 2019, 13:24:18 PMNow it's gonna be black painted...
And here it is.
Posted by mittico68
- May 06, 2019, 01:30:48 AMQuote from: Tfrank59 on May 05, 2019, 10:38:55 AMBy the way did you ever get your bike running? I know on the other post you were still fighting with the electrical.
Nope. The crusade is still going on and I'm really disappointed, because the ridin' season is open... 
Posted by Tfrank59
- May 05, 2019, 10:38:55 AMI'm with you I want my mods to be reversible also. Really good thinking on how to modify your air box and not mess with the OEM. I just changed over to a K & N since rejetting and the thing runs beautifully all throughout the RPM range. By the way did you ever get your bike running? I know on the other post you were still fighting with the electrical.
Posted by mittico68
- May 05, 2019, 09:26:25 AMHere's another update about my winter's mods.
I've gone with the full open air filter and carburetor rejetting, but I didn't want to get definitively rid of the OEM snorkel air box, as I just like each mod to be as reversible as possible.
So I've found out that a laundry detergent's cup that was layin' around in my house is perfect for my purpose, as it gave me the chance to close the bottom part of said snorkel, leaving it in place.
This way, I've just had to take off the upper part of the snorkel, disconnect its rubber gasket and put it in said cup (yes, it fits perfectly!): then, I simply placed the cup on the entry hole of the snorkel's bottom part. And voilà! (and no interference by the tank).
Please, take a look at attached pics.
Posted by Tfrank59
- May 04, 2019, 17:54:34 PMMy latest upgrade was to finally get a saddlebag mounted on my bike check out the vid
Posted by Lucky
- May 02, 2019, 07:48:50 AMAs for tach, I have had good luck with these, and have in my 800. 15 bucks, 2 zipties and 3" of electrical tape. Mounted on the bars, near the right clamp
Timorn Inductive Hour Meter for 2 Stroke & 4 Stroke Small Engine, Replaceable Battery Waterproof Tachometer for Marine ATV Motorcycle UTV Engine (Black) https://www.amazon.com/dp/B0756VGDTC/ref=cm_sw_r_cp_apa_i_gAUYCbTAZVZWT
Posted by mittico68
- May 01, 2019, 13:24:18 PMBrief update.
As most of you already know, ma-deuce is still kept in the garage because of the trubles I'm facin' in tryin' to modify the oem ignition switch.
But this gave me the time to make some more mods.
And here's the last one: a brand new vintage indian style rearlight! Look at attached pics, please.
As you will note, I made a back plate by using the OEM rearlight's one as a template.
Now it's gonna be black painted...
Posted by Sparky1971
- April 08, 2019, 20:31:02 PMChanged the oil and the filter and a new rear tire. Hope to see how many miles a Michelin will get on this bike.
Posted by Tfrank59
- April 02, 2019, 10:36:52 AMQuote from: rob f on March 28, 2019, 08:06:09 AMI'm glad the trail tech is working for you. I don't recall exactly but I believe when I hooked mine up it was configured correctly for our bikes--for a v-twin--without changing any settings and was reading correctly as soon as I connected it. I figured I'd have to mess with that setting (I thought the OEM sets them up for a 4 stroke single--guess not) but was pleased that it worked right from the get-go. It's not essential but a nice add-on to be able to see RPMs at a glance! Once in a while I'll be in loud traffic and can't hear my motor (time to make it louder?Tom, just an update on the tach.
Just installed my trail tech tach and was super easy. Had to stop and think about the impulse setting because of the Kawi "wasted spark "system. Must have gotten it correct as idle is about 1100 rpm.
), so having a tach is kind of essential in that moment.
Posted by RockinRollin
- April 02, 2019, 06:42:31 AMMoved to a new house a year ago, bike is 1.5 hours away at my brother's place. Still unpacking. Would like to get a larger windscreen to cut down on the turbulence. Also would like to find lowers that would fit on the Drifter. I was told by a fellow on FB that he had Nomad lowers that fit the fire and steel windshield but he couldn't tell me what part number or year his lowers were from.
Posted by rob f
- March 28, 2019, 08:06:09 AMTom, just an update on the tach.
Just installed my trail tech tach and was super easy. Had to stop and think about the impulse setting because of the Kawi "wasted spark "system. Must have gotten it correct as idle is about 1100 rpm. Haven't tried it on the road yet as winter isn't done with us yet. Had a real nice stretch of weather and was about one day away from Drifting down the laneway when a storm came in and dropped 8" of wet snow. Should be melted off in about 4 days but another dump is expected in about 5.
Glad to hear that your new sparkplugs worked. Just like my old boss that apprenticed me said..... "start with the cheap easy stuff first and work your way up"
Posted by rob f
- January 29, 2019, 07:37:34 AMThanks for the numbers. They will be usefull when I install my Trail Tech 742-A00 Tach that I just ordered online. $55 Canadian