Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Bucko
 - June 27, 2019, 14:43:40 PM

Is your kickstand down when you release the clutch (in gear)?  If so, the motor will die - there's a 'kill switch' on the kickstand.

Posted by Big Foot
 - June 27, 2019, 11:45:17 AM

Somehow, I ran my bike low on oil. It had been a while since my last service but I only had 500 miles on the oil. My bike doesn't leak or smoke. I drained the oil to measure how much was left and it was down under a quart. I can't figure out where the oil went.
It starts up fine now with fresh oil and filter. I drove it several miles to see if it was going to be ok. Everything seemed to work as it should. Clutch worked fine. It seemed to be OK, but now when I go to put it in gear with the clutch engaged, the bike jumps into gear and dies. It seems like the clutch isn't working. I bled the system and it seems like the hydraulics are fine. I can hear the slave cylinder working.
Does anyone have a suggestion?
Thanks BiG FOOT!!!!! :(

SMF spam blocked by CleanTalk