GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Tfrank59
- June 12, 2019, 23:23:31 PM Hey thanks for telling us how that went. I'm glad it worked out. I'm glad you got rid of the Harley logo too 
Posted by Lucky
- June 12, 2019, 16:34:07 PMI bought a VRSCF Quick-Release Compact Mid-Sport Windshield, Harley Part Number 57610-09 - used, that went right on my 800 - the purchase did not include 2 pieces, called "Screw, snap socket, windshield mount (2) 57619-09" which would have made this a perfect fit - i just temp used some 1/2 "sharkbite" water line from home depot, which i cut to length, drilled a hole in the side, and tied in with black zips, to see if i like it.
I have a OEM wiindscreen, that works great, but it's getting into the 90s in Texas, and I wanted more wind than OEM, but less than "neeked" - so, for $50 i picked up a used one - works GREAT -- wind hits about chin level, but works well - good handling, good bug proofing, and looks pretty good - I removed the harley logo, though, on the top "strap" and will take a grinder and flatten that down to be straight, rather than Harley shaped.
(with alignment adjustment) The clamps worked GREAT, i suggest putting them up towards the top of the tapers, closing them, slide them down till stop, mark that spot with a sharpie, open them, and move down about 1/3 to 1/2 an inch -- the clamps are zinc and WILL break if too much force is used.
I'll keep it .. looks nice, small, 18" wind screen / shield and comes off easy, even with the mount for the OEM one still on the bike ..