GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Tfrank59
- May 04, 2019, 17:54:34 PMMy latest upgrade was to finally get a saddlebag mounted on my bike check out the vid
Posted by Lucky
- May 02, 2019, 07:48:50 AMAs for tach, I have had good luck with these, and have in my 800. 15 bucks, 2 zipties and 3" of electrical tape. Mounted on the bars, near the right clamp
Timorn Inductive Hour Meter for 2 Stroke & 4 Stroke Small Engine, Replaceable Battery Waterproof Tachometer for Marine ATV Motorcycle UTV Engine (Black) https://www.amazon.com/dp/B0756VGDTC/ref=cm_sw_r_cp_apa_i_gAUYCbTAZVZWT
Posted by mittico68
- May 01, 2019, 13:24:18 PMBrief update.
As most of you already know, ma-deuce is still kept in the garage because of the trubles I'm facin' in tryin' to modify the oem ignition switch.
But this gave me the time to make some more mods.
And here's the last one: a brand new vintage indian style rearlight! Look at attached pics, please.
As you will note, I made a back plate by using the OEM rearlight's one as a template.
Now it's gonna be black painted...
Posted by Sparky1971
- April 08, 2019, 20:31:02 PMChanged the oil and the filter and a new rear tire. Hope to see how many miles a Michelin will get on this bike.
Posted by Tfrank59
- April 02, 2019, 10:36:52 AMQuote from: rob f on March 28, 2019, 08:06:09 AMI'm glad the trail tech is working for you. I don't recall exactly but I believe when I hooked mine up it was configured correctly for our bikes--for a v-twin--without changing any settings and was reading correctly as soon as I connected it. I figured I'd have to mess with that setting (I thought the OEM sets them up for a 4 stroke single--guess not) but was pleased that it worked right from the get-go. It's not essential but a nice add-on to be able to see RPMs at a glance! Once in a while I'll be in loud traffic and can't hear my motor (time to make it louder?Tom, just an update on the tach.
Just installed my trail tech tach and was super easy. Had to stop and think about the impulse setting because of the Kawi "wasted spark "system. Must have gotten it correct as idle is about 1100 rpm.
), so having a tach is kind of essential in that moment.
Posted by RockinRollin
- April 02, 2019, 06:42:31 AMMoved to a new house a year ago, bike is 1.5 hours away at my brother's place. Still unpacking. Would like to get a larger windscreen to cut down on the turbulence. Also would like to find lowers that would fit on the Drifter. I was told by a fellow on FB that he had Nomad lowers that fit the fire and steel windshield but he couldn't tell me what part number or year his lowers were from.
Posted by rob f
- March 28, 2019, 08:06:09 AMTom, just an update on the tach.
Just installed my trail tech tach and was super easy. Had to stop and think about the impulse setting because of the Kawi "wasted spark "system. Must have gotten it correct as idle is about 1100 rpm. Haven't tried it on the road yet as winter isn't done with us yet. Had a real nice stretch of weather and was about one day away from Drifting down the laneway when a storm came in and dropped 8" of wet snow. Should be melted off in about 4 days but another dump is expected in about 5.
Glad to hear that your new sparkplugs worked. Just like my old boss that apprenticed me said..... "start with the cheap easy stuff first and work your way up"
Posted by rob f
- January 29, 2019, 07:37:34 AMThanks for the numbers. They will be usefull when I install my Trail Tech 742-A00 Tach that I just ordered online. $55 Canadian
Posted by Tfrank59
- January 28, 2019, 11:28:13 AMThe tach is simple to wire up--Ratman wanted me to send pics and instructions, which I did but now can't find the post. At any rate, you probably won't be disappointed for $36 or thereabouts. I hope they'll ship to CA with no problems. As far as RPM's, I'm using stock sprockets and to do 70 it's somewhere in the high 4's to low 5's, so with your increased gearing you should be fine. I think the girls can do 4500 all day long with no issues.
Posted by rob f
- January 28, 2019, 10:51:49 AMThanks for the pic and info. That looks exactly like what i want. I just need something inexpensive to tell me what the engine is doing at gear shifting points. I"ve read that this engine is an over-square and is meant to run at higher rpms. I'm still muck'in around with sprockets and still seems like it's underpowered in 5th. i am now running a 17/38 combo A tach reading may tell me that i can run higher in 4 on the hyway. Most of my cruising would be between 60-70 mph. Maybe this is 4's range with my sprocket set up.
Posted by Tfrank59
- January 28, 2019, 09:41:20 AMQuote from: rob f on January 28, 2019, 08:25:00 AMThis thread on the tach issue might interest you...if you haven't yet seen it: https://www.vulcandrifterriders.com/forum/index.php?topic=42638.msg94956#msg94956Ya, had my drifter wheels rolling twice this winter.
..........unfortunately it was only in the sea can and only 2' just to eliminate tire flat spots. I did sit on it and flibber out some fake motorcycle sounds pretending like i was riding. Will have to hold me for a few more months.
Only work i may do to it is try to find an engine tach to mount on the handle bars. Tried to mount one last season but buried the needle on start up and wrecked it. Found out later that this engine uses a "wasted spark ignition" so i guess the tach was reading double. Maybe have to buy a tach for a 2 stroke engine? Cost a bit of money and don't want a repeat failure.
My pic got inverted but if you can see it, the little digital tach is very discreet and after over 3 years/500 hours still works great. I'll probably have to change the batt this year but that's no biggie.
Here's the pic shown correctly...
Posted by rob f
- January 28, 2019, 08:25:00 AMYa, had my drifter wheels rolling twice this winter.
..........unfortunately it was only in the sea can and only 2' just to eliminate tire flat spots. I did sit on it and flibber out some fake motorcycle sounds pretending like i was riding. Will have to hold me for a few more months.
Only work i may do to it is try to find an engine tach to mount on the handle bars. Tried to mount one last season but buried the needle on start up and wrecked it. Found out later that this engine uses a "wasted spark ignition" so i guess the tach was reading double. Maybe have to buy a tach for a 2 stroke engine? Cost a bit of money and don't want a repeat failure.
Posted by tj
- January 26, 2019, 07:06:51 AMBought a mobile home in Florida...been busy doing the floors, painting etc. We brought the Goldwing down and ride once a week.
Posted by Troll
- January 24, 2019, 09:45:21 AMQuote from: Tfrank59 on January 24, 2019, 06:57:35 AMWell I love the just-put-gas-in-her-and-ride part. The truth is I got three bikes now and the Drifter requires the least amount of maintenance. The one thing that I haven't done and said I would this winter is checking the valves. I guess I better get on that before the nice weather starts and I won't feel like doing anything at that point except riding
Yeah, I'd like to do that, but snow and sub zero temps prevent it.....
Posted by Tfrank59
- January 24, 2019, 06:57:35 AMWell I love the just-put-gas-in-her-and-ride part. The truth is I got three bikes now and the Drifter requires the least amount of maintenance. The one thing that I haven't done and said I would this winter is checking the valves. I guess I better get on that before the nice weather starts and I won't feel like doing anything at that point except riding 